Description
This is the MEC 502-series progressive charge bar set up to drop a consistent 1-5/8 oz lead shot charge. The charge bar is the piece that meters how much shot drops into each shell, so swapping to the right bar is the fastest way to tune your loads for a specific payload. Machined from anodized aluminum, it runs smooth through countless cycles and holds its measurement load after load.
How the 1-5/8 oz Lead Shot Charge Bar Works
On a MEC press, the charge bar handles shot and the powder bushing handles powder. The bar itself sets your shot weight at 1-5/8 oz, while a removable powder bushing (sold separately) sets the powder throw. That split lets you match a published recipe exactly by pairing this bar with the correct bushing for your powder of choice. One nice touch is the soft insert built into the bar, which helps keep larger or harder lead shot from shearing as the bar cycles.
Press Fit for the 502 Progressive Charge Bar
The 502 series is the progressive bar. It's designed for MEC progressive machines, which covers presses like the 650, Grabber, Hustler, and 9000. This is an important distinction because progressive and single-stage bars use different hole spacing, so a 302 single-stage bar will not drop into a progressive press and vice versa. If you're running a single-stage 600 Jr or Sizemaster, you'll want the 302 version instead.
One more thing worth knowing: lead and steel shot charge bars are not interchangeable. This bar is calibrated for lead shot specifically, so keep it paired with lead payloads for accurate metering. For trap, skeet, sporting clays, or hunting loads calling for a 1-5/8 oz payload, this bar gets you there without guesswork and keeps your reloading sessions moving at full speed.
Key Specifications
- Manufacturer: MEC (Mayville Engineering)
- Manufacturer Part Number: 502158
- UPC: 098489014892
- Shot Payload: 1-5/8 oz
- Series: 502 (Progressive)
- Shot Type: Lead
- Material: Anodized aluminum
- Press Compatibility: MEC progressive presses (650, Grabber, Hustler, 9000)
- Powder Bushings: Accepts removable MEC powder bushings (sold separately)
- Special Feature: Soft insert to reduce shot shearing
What’s Included
- (1) MEC 1-5/8 oz 502-series progressive lead shot charge bar
Frequently Asked Questions
Which MEC presses does this 502 charge bar fit?
The 502 series is the progressive bar, so it works in MEC progressive presses like the 650, Grabber, Hustler, and 9000. Progressive and single-stage bars have different hole spacing, so this one won't fit a single-stage press. If you run a 600 Jr or Sizemaster, grab the 302-series version instead.
Does this charge bar come with a powder bushing?
No, the powder bushing is sold separately. The charge bar sets your shot weight at 1-5/8 oz while the removable bushing controls the powder throw. Match the bushing to your specific powder and recipe to get the right powder charge.
Can I use this bar with steel shot?
No, this bar is calibrated for lead shot only. MEC makes separate charge bars for steel, and the two are not interchangeable because the metering differs between shot types. Keep this one paired with lead payloads for accurate drops.
What does the soft insert on the charge bar do?
The soft insert helps keep larger or harder lead shot from shearing as the bar cycles back and forth. That means cleaner shot cutoff and more consistent charges over long loading sessions. It's a small detail that makes a difference with bigger shot sizes.




Reviews
There are no reviews yet.