Description
The MEC 302 Single Stage Charge Bar handles one of the most important jobs on your press: metering out exactly how much shot drops into each hull. This one is set up for a 1/2 ounce lead payload and carries the 302 marking, which tells you it's built for single stage reloaders. Machined from anodized aluminum, it's a quick-change design that swaps in and out without a fuss when you're dialing in a different load.
One thing worth knowing up front: the charge bar only controls the shot side of the equation. The amount of powder is set by a removable powder charge bushing, which is sold separately, so you can tune your powder-to-shot ratio to match whatever recipe and powder brand you're running. That modular setup is a big part of why MEC presses have stayed popular with target shooters and bird hunters for decades.
Where the MEC 1/2 oz Lead Shot Bar Fits
This 302 series bar is made for MEC single stage presses, including the Mark V and Sizemaster. It's cut specifically for lead shot. Lead and steel charge bars are not interchangeable, so if you're loading steel you'll want the bar made for it. Matching the right bar to your press and your shot material keeps your loads consistent and your metering clean.
A Soft Insert That Protects Your 302 Charge Bar Loads
A nice touch on these bars is the soft insert, which helps keep larger shot sizes and harder lead from shearing as the bar cycles. Sheared shot can throw off your charge weight and gum up the works, so that little detail pays off over a long reloading session. For anyone building light 1/2 ounce target or practice loads, this bar gives you repeatable drops pull after pull, which is exactly what you want when you're running through a bench full of hulls.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number (MPN): 30212
- UPC: 098489012546
- Series: 302 (Single Stage)
- Shot Payload: 1/2 oz
- Shot Type: Lead
- Material: Anodized Aluminum
- Color: Red
- Press Compatibility: MEC Single Stage presses including Mark V and Sizemaster
- Design: Quick-change with soft insert
What’s Included
- MEC 302 Single Stage 1/2 oz Lead Shot Charge Bar
Frequently Asked Questions
Which presses does the MEC 302 single stage charge bar fit?
This 302 series bar is designed for MEC single stage presses, including the Mark V and Sizemaster. The 302 marking indicates it's for single stage reloaders, while 502 bars are made for progressive presses. The two series are not interchangeable, so match the bar to your press type.
Does this charge bar come with a powder bushing?
No, the powder charge bushing is sold separately. The charge bar meters the shot, while the removable bushing sets the powder charge. That setup lets you tune the powder-to-shot ratio to whatever load recipe and powder brand you're using.
Can I use this lead shot charge bar for steel shot?
No, this bar is made specifically for lead shot. MEC makes separate bars for steel, and the two are not interchangeable. If you're loading steel, you'll need the steel-designated charge bar instead.
What does the soft insert on the MEC charge bar do?
The soft insert helps keep larger shot sizes and harder lead from shearing as the bar cycles through the press. Sheared shot can throw off your charge weight and create metering problems. The insert helps keep your drops consistent over a long reloading session.




Reviews
There are no reviews yet.