0
0

Brush Research Flex-Hone Oil FHP – 1/2 Pint Honing Oil

UPC: 843469142818

$16.99

133 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a Flex-Hone tool, this is the fluid it was designed to work with. Brush Research made their FHP oil to get the most out of their abrasive hones, and it comes in a 1/2 pint bottle that lasts a surprisingly long time since you only need a small amount to do the job. It's a petroleum-based blend that plays nice with aluminum, brass, and steel, so you can move between different projects without worrying about the oil harming your workpiece.

What Makes Flex-Hone Oil Different

This isn't just generic honing fluid poured into a bottle. It combines honing and lapping oils with a lard oil that helps prevent galling on aluminum, a moisture dispersant, and a surfactant wetting agent that keeps the surface fully lubricated while you work. There's also an additive that holds metal cuttings and contaminants in suspension so debris doesn't drag across your surface and cause scoring. Brush Research is clear that using other oils can damage the abrasive balls on the hone, so matching the fluid to the tool matters if you want that tool to last.

Using Flex-Hone Oil on Firearms

Gunsmiths and hobbyists reach for Flex-Hone tools to polish revolver chambers, shotgun barrels, slides, and magazine tubes, and this oil is what turns that abrasive action into a smooth slurry. Apply it sparingly on the surface, run the hone at the recommended speed, and inspect your work every few strokes to avoid overhoning. When you're done, clean the part with a rag and clean motor oil until it wipes clean, wash with warm soapy water, dry thoroughly, and give it a light coat of gun oil to keep rust away.

One thing worth noting: on hydraulic cylinders, skip the petroleum oil and use hydraulic brake fluid or a non-petroleum water-soluble lubricant instead. For everything else on the bench, this half pint keeps your hone cutting properly and your finished surfaces clean.

Key Specifications

  • Manufacturer: Brush Research Mfg. Co., Inc.
  • Manufacturer Part Number: FHP
  • UPC: 843469142818
  • Volume: 1/2 Pint (8 fl oz)
  • Oil Base: Petroleum
  • Composition: Blend of honing and lapping oils
  • Compatible Metals: Aluminum, brass, steel
  • Intended Use: Flex-Hone flexible cylinder honing tools
  • Additives: Lard oil, moisture dispersant, surfactant wetting agent, anti-bacteria agent
  • Country of Origin: United States

What’s Included

  • 1/2 pint (8 fl oz) bottle of Brush Research Flex-Hone Oil (FHP)

Frequently Asked Questions

Can I use regular motor oil instead of Flex-Hone Oil?

You can technically hone with water soluble oils, mineral oils, or motor oil, but Brush Research formulated FHP specifically for their tools. Using other oils can destroy the abrasive globules on the hone and voids the guarantee. If you want the best surface finish and the longest tool life, stick with the matched oil.

How much Flex-Hone Oil do I need to use per job?

Use it sparingly. Only a small amount is needed on the cylinder or bore walls to create the slurry that does the cutting. Because a little goes so far, a 1/2 pint bottle handles a lot of projects before you need a refill.

Is Flex-Hone Oil safe for use on firearm chambers and barrels?

Yes, this is the recommended fluid for polishing revolver chambers, shotgun barrels, slides, and magazine tubes with a Flex-Hone tool. It works on aluminum, brass, and steel without harming the metal. After honing, clean the part, wash with warm soapy water, dry it, and apply a light coat of gun oil to prevent rust.

Can I use this oil when honing hydraulic cylinders?

No, hydraulic cylinders are the exception. For those, use hydraulic brake fluid or a non-petroleum water-soluble lubricant instead of this petroleum-based oil. For all other metal honing applications, the FHP oil is the way to go.

Additional information

UPC

843469142818

Manufacturer

Manufacturer Part Number

FHP

Reviews

There are no reviews yet.

Be the first to review “Brush Research Flex-Hone Oil FHP – 1/2 Pint Honing Oil”