0
0

Forster NR1400 Inside Neck Reamer .4025″ for .40/10mm Brass

UPC: 757253005022

$31.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you reload .40 S&W or 10mm Auto and you've ever wrestled with a bullet that just won't seat right, the culprit is often excess brass built up on the inside of the case neck. The Forster NR1400 Inside Neck Reamer is made to clear that out. Ground to .4025" for .400 diameter bullets, it removes the thickened brass that creeps in after repeated firings, including the dreaded donut of material that can collect down at the neck and shoulder junction.

This reamer is cut from high grade, wear-resistant tool steel and built with a staggered tooth pattern, so it shaves the brass smoothly instead of grabbing and chattering its way through. That translates to cleaner, more uniform neck walls and bullets that seat without a fight. Thick necks can bump up chamber pressure and throw flyers downrange, so getting the inside walls back to spec is one of those small case prep steps that pays off on paper.

How the NR1400 Fits Into Your Case Prep

The NR1400 is designed to run in a Forster Case Trimmer. It drops into the cutter head in place of the pilot on the Original, Classic, or Power Case Trimmer, then you turn the assembly until the reamer passes completely through the neck and back it out while it's still cutting. A quick chamfer and deburr of the case mouth afterward and you're set for the sizing die.

Getting the Most From Your .4025" Neck Reamer

Timing matters with this tool. Standard neck reamers like this one are meant to be used after cases have been fired with a full load and before the neck or full-length sizing step. An easy way to check if you even need it is to slide a bullet into a fired, unsized neck. If you feel drag or interference, that neck is a candidate for reaming. Keep the chips brushed away as you work and the cutter will stay sharp and happy for a long run of brass.

For handloaders chasing tighter groups out of their .40 and 10mm brass, this is the kind of unglamorous tool that quietly earns a permanent spot on the bench.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: NR1400
  • UPC: 757253005022
  • Reamer Diameter: 0.4025"
  • Bullet Diameter: .400" (.400-.401)
  • Caliber/Gauge: .40 S&W / 10mm Auto
  • Material: High grade, wear-resistant tool steel
  • Tooth Design: Staggered tooth for chatter-free cutting
  • Compatibility: Forster Original, Classic, and Power Case Trimmers
  • Country of Origin: USA

What’s Included

  • One Forster NR1400 inside neck reamer (.4025")

Frequently Asked Questions

What does the Forster NR1400 inside neck reamer fit?

It's ground to .4025" for .400 diameter bullets, which covers .40 S&W and 10mm Auto brass. It mounts into the cutter head of a Forster Case Trimmer in place of the pilot. The reamer works with the Original, Classic, and Power Case Trimmer models.

When should I use the neck reamer during reloading?

Standard neck reamers are meant to be used after the case has been fired with a full load and before the neck or full-length sizing operation. The simple rule is ream after firing, then size. A quick test is to slide a bullet into a fired, unsized neck, and if you feel interference, that neck is ready to ream.

Why does the NR1400 use a staggered tooth design?

The staggered tooth pattern lets the reamer cut the inside neck wall smoothly without grabbing or chattering. That gives you cleaner, more uniform brass and a bullet that seats without excess drag. The cutter is ground from wear-resistant tool steel so it holds up over a lot of brass.

Does the inside neck reamer remove the donut at the neck and shoulder?

Yes, it's built to clear excess brass from the inside neck walls, including the donut of material that can build up at the neck and shoulder junction after repeated firings. Just remember to chamfer and deburr the case mouth after reaming before you move on to your sizing die.

Additional information

UPC

757253005022

Manufacturer

Manufacturer Part Number

NR1400

Caliber/Gauge

.40/10 mm (.400-.401)

Reviews

There are no reviews yet.

Be the first to review “Forster NR1400 Inside Neck Reamer .4025″ for .40/10mm Brass”