0
0

RCBS 0.341″ Steel Neck Sizing Bushing for Gold Medal Match Dies

UPC: 076683816566

$16.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the 0.341" size in RCBS's line of steel neck bushings, the little component that lets you fine-tune how tightly your case neck grips the bullet. Instead of a fixed-diameter die that sizes everything the same, a bushing setup gives you control over neck tension, and that control is where a lot of the accuracy gains in precision reloading come from. These bushings are self-centering, so they align themselves with the case neck as it enters, and they're hardened steel for a long service life.

Where the 0.341" Steel Neck Bushing Fits In

This bushing is built for RCBS Gold Medal Match and Matchmaster bushing dies, the changeable-diameter setup that bench rest and long-range crowds have leaned on for years. One nice bonus is cross-compatibility: Redding, Wilson, and Hornady bushings will also run in RCBS Gold Medal bushing dies, so you're not locked into a single brand once your die is set up. Whether you're running a full-length bushing die or a neck-only die, the bushing does the same job.

Getting the Most From Your Neck Bushing

Sizing only the neck, just enough to hold the bullet snugly, reduces work hardening of the neck brass. That means longer case life and more consistent tension round to round, which shows up on paper. To get those benefits you'll want quality brass with uniform neck wall thickness, since the bushing sizes off the outside of the neck. Worth noting: these come in-the-white, meaning bare steel, so stick with your normal case lube when you run them.

Picking the Right Bushing Diameter

There are two easy ways to land on your size. Measure the outside neck diameter of a loaded round and subtract .002" to .003", which leaves about .001" of spring-back for correct tension. Or measure neck wall thickness, multiply by two, add your bullet diameter, and subtract .001". RCBS suggests keeping bushings one or two sizes above and below your target on hand so you can experiment and find the sweet spot for your rifle.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 81656
  • UPC: 076683816566
  • Bushing Diameter: 0.341"
  • Material: Hardened Steel
  • Finish: In-the-white (bare steel)
  • Type: Self-centering, interchangeable neck bushing
  • Compatibility: RCBS Gold Medal Match / Matchmaster bushing dies
  • Cross-Compatible: Accepts Redding, Wilson, and Hornady bushings in RCBS Gold Medal dies

What’s Included

  • One RCBS 0.341" steel neck sizing bushing

Frequently Asked Questions

What dies does the 0.341" steel neck bushing work with?

It's made for RCBS Gold Medal Match and Matchmaster bushing dies. It works in both full-length bushing dies and neck-only sizing dies. If you're running one of those RCBS bushing dies, this bushing drops right in.

How do I know if 0.341" is the right bushing size for me?

Measure the outside neck diameter of a loaded cartridge and subtract .002" to .003", which leaves about .001" of brass spring-back for proper tension. You can also measure neck wall thickness, multiply by two, add your bullet diameter, and subtract .001". It's smart to keep a bushing or two above and below your target so you can fine-tune tension.

Do I still need to lube my cases with this bushing?

Yes. These bushings come in-the-white, meaning bare, uncoated steel, so traditional case lubrication is still required. Your normal sizing lube routine works fine here.

Can I use Redding or Hornady bushings in the same die instead?

In RCBS Gold Medal bushing dies, Redding, Wilson, and Hornady bushings will also fit. That gives you some flexibility if you already have bushings from another brand in the diameter you need. Just double-check the diameter matches your target neck tension.

Additional information

UPC

076683816566

Manufacturer

Manufacturer Part Number

81656

Reviews

There are no reviews yet.

Be the first to review “RCBS 0.341″ Steel Neck Sizing Bushing for Gold Medal Match Dies”