0
0

Forster .338 Inside Neck Reamer (.340-.3405) NR1338 for Case Trimmers

UPC: 757253004971

$31.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Thick or uneven case necks are one of those quiet accuracy killers that handloaders don't always catch until they're chasing flyers on paper. This Forster Inside Neck Reamer is built to deal with exactly that. It mounts into the cutter of a Forster Case Trimmer in place of the pilot and carves excess brass out of the inside of the neck wall, leaving you with a more consistent inner diameter and a cleaner home for your .338 caliber bullets. It also helps clear out the dreaded donut of brass that can build up near the neck-shoulder junction after repeated firings.

What the .338 Inside Neck Reamer Actually Does

Standard Forster reamers are ground .0025 to .003 inches larger than the maximum bullet diameter, which on this .338 model puts the cut right in that .340 to .3405 range. That little bit of clearance is intentional and gives you a uniform inner neck without choking down bullet release. The staggered tooth design is the real highlight here, cutting the brass smoothly and keeping chatter out of the equation so you're not fighting a rough, grabby cut.

Built From Tool Steel That Lasts

Forster grinds these from high grade, wear-resistant tool steel, so the cutting edges hold up over a lot of brass. If you're loading .338 Lapua Magnum, .338 Winchester Magnum, or any other .338-class cartridge, consistent neck thickness pays off in concentricity and chamber fit, and that's where a tool like this earns its spot on the bench.

How to Use It Right

Neck reaming works best after cases have been fired with a full load and before you neck size or full-length size. Drop the reamer into the cutter in place of the pilot, turn it until it passes completely through the neck, then keep turning as you withdraw it. Chamfer and deburr the case mouth afterward and size your necks if you're running standard inside reamers. It's a simple step, but it's one of the better ways to tighten up groups when you're working magnum brass.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: NR1338
  • UPC: 757253004971
  • Caliber: .338 Caliber
  • Bullet Diameter Use: .338 diameter bullets
  • Cutting Range: .340 to .3405 inches
  • Grind Spec: Ground .0025 to .003 inches over max bullet diameter
  • Material: High grade, wear-resistant tool steel
  • Tooth Design: Staggered tooth for chatter-free cutting
  • Compatibility: Forster Original, Classic, and Power Case Trimmers
  • Product Type: Inside Neck Reamer

What’s Included

  • One Forster .338 Inside Neck Reamer (NR1338) for use in the cutter head of a Forster standard trimmer

Frequently Asked Questions

What does the Forster .338 Inside Neck Reamer do?

It removes excess brass from the inside walls of your .338 case necks to create a more uniform inner diameter. That uniformity helps with bullet fit and concentricity, and it can clear out the donut of brass that builds up near the neck-shoulder junction after repeated firings. Thick or inconsistent necks can cause high chamber pressures and flyers, so reaming helps keep things consistent.

Does this reamer work with my Forster case trimmer?

Yes. It's made to drop into the cutter of the Forster Original, Classic, and Power Case Trimmers in place of the pilot. If you're running one of those trimmers, this reamer bolts right into your existing setup with no extra mounting gear.

When should I ream my case necks?

Neck reaming is meant to be done after cases have been fired with a full load and before you neck size or full-length size them. Run the reamer completely through the neck, then keep turning as you pull it back out. Chamfer and deburr the case mouth afterward, and size the necks if you're using standard inside reamers.

Is this reamer only for .338 Lapua Magnum?

No. It works with any .338 caliber cartridge that uses .338 diameter bullets, including .338 Lapua Magnum, .338 Winchester Magnum, and other .338-class rounds. The .340 to .3405 cutting range gives you the right clearance over a standard .338 bullet.

Additional information

UPC

757253004971

Manufacturer

Manufacturer Part Number

NR1338

Caliber/Gauge

.338 Caliber

Reviews

There are no reviews yet.

Be the first to review “Forster .338 Inside Neck Reamer (.340-.3405) NR1338 for Case Trimmers”