0
0

RCBS 0.280″ Steel Neck Sizing Bushing for Gold Medal Match Dies

UPC: 076683815958

$16.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck tension is one of those little details that separates so-so groups from the ones you brag about, and this RCBS 0.280-inch steel bushing gives you the control to get it right. It's a self-centering, interchangeable bushing that sizes the case neck down to a precise diameter, so you're squeezing the brass just enough to hold the bullet without overworking it. That means more uniform tension round to round and less of the work-hardening that cracks necks before their time.

Where the 0.280 Steel Neck Bushing Fits In

This bushing is built for RCBS Gold Medal Match Series and MatchMaster bushing dies, and it runs in both the full-length and neck-sizing setups. One nice perk is cross-compatibility: Redding, Wilson, and Hornady bushings also fit RCBS Gold Medal bushing dies, and RCBS bushings generally return the favor in those brands. So once your die is set up, you aren't locked into a single brand of bushing.

Picking the Right Neck Bushing Size

Getting the diameter right matters as much as owning the bushing. The simplest method is to measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inch, which leaves roughly .001 inch of brass spring-back for correct tension. You can also measure neck wall thickness, multiply by two, add your bullet diameter, then subtract .001 inch. RCBS recommends keeping bushings one to two sizes above and below your target so you can fine-tune as your brass and load develop.

Why Precision Handloaders Reach For Steel Bushings

The changeable-diameter bushing system has been a benchrest and long-range staple for years, and it's popular for a reason. Swapping bushings lets you adjust tension for different brass lots or chase better consistency without buying a whole new die. For the best results, pair this bushing with quality brass that has uniform neck wall thickness, since the bushing can only be as consistent as the cases you feed it.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 81595
  • UPC: 076683815958
  • Bushing Diameter: 0.280 in
  • Material: Steel
  • Type: Interchangeable self-centering neck sizing bushing
  • Compatible Dies: RCBS Gold Medal Match Series and MatchMaster bushing dies
  • Styles Supported: Full-length and neck sizing
  • Cross-Compatibility: Accepts in Redding, Wilson, and Hornady bushing dies
  • Quantity: 1 bushing
  • Country of Origin: USA

What’s Included

  • One RCBS 0.280" steel neck sizing bushing

Frequently Asked Questions

What dies does the 0.280 steel neck bushing fit?

It's made for RCBS Gold Medal Match Series and MatchMaster bushing dies. The bushing works in both the full-length and neck-sizing styles, so you can use it however your die is configured.

Can I use this RCBS bushing in Redding or Hornady dies?

Yes. RCBS, Redding, Wilson, and Hornady neck bushings are cross-compatible, so this 0.280 bushing will run in those brands' bushing dies and vice versa. Forster bushings are the odd one out and use a different design.

How do I know if the 0.280 bushing is the right size for my load?

Measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inch, which gives you roughly .001 inch of spring-back for proper tension. You can also measure neck wall thickness, multiply by two, add the bullet diameter, and subtract .001 inch. It helps to keep bushings a size or two on either side of your target so you can fine-tune.

What's the benefit of a bushing over a standard expander ball die?

A bushing sizes only the neck down to a set diameter, so you control exactly how much tension grips the bullet without overworking the brass. That reduces work-hardening and helps your cases last longer while improving consistency. It works best when paired with brass that has uniform neck wall thickness.

Additional information

UPC

076683815958

Manufacturer

Manufacturer Part Number

81595

Reviews

There are no reviews yet.

Be the first to review “RCBS 0.280″ Steel Neck Sizing Bushing for Gold Medal Match Dies”