Description
This is the Forster .249" neck bushing (part number BUSH-249), a single sizing bushing that lets you control exactly how much your case necks get worked during resizing. Instead of relying on a one-size expander ball, the bushing itself sets the inside diameter of the neck, so you choose the amount of bullet grip that works best for your brass and your load. It's a small part that makes a real difference once you start chasing consistency.
How the .249" Forster Bushing Earns Its Keep
The idea behind a bushing setup is that neck tension comes down to the wall thickness of your brass, not the chamber of your rifle. The bushing sizes the neck down only as far as it needs to, which keeps you from overworking the brass and helps extend case life. Less working of the neck also tends to mean straighter loaded rounds and more repeatable seating pressure, which is exactly what precision and benchrest reloaders are after.
Build Quality on the BUSH-249 Neck Bushing
Forster runs these bushings through a super-cooling cryogenic process that refines and closes the surface of the steel for an ultra smooth finish, then heat treats and hones each one to the exact stated inside diameter. That clean interior is what gives you a smooth pass and a true size every time. A common way to land on the right bushing is to measure the outside neck diameter of a loaded round and subtract about .002", which is how the .249" lands in a lot of loading rooms.
One thing worth knowing up front: Forster bushings are proprietary. They're taller with a conical base and a larger outside diameter than Redding, Wilson, RCBS, and similar bushings, so this .249" is designed to seat properly in Forster Bushing Bump Neck Sizing Dies and Forster Bushing Full Length Sizing Dies.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BUSH-249
- UPC: 757253998713
- Inside Diameter: 0.249 in
- Type: Neck Sizing Bushing
- Material: Cryogenically treated, heat treated steel
- Finish: Honed interior, ultra smooth
- Compatibility: Forster Bushing Bump Neck & Bushing Full Length Sizing Dies
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One Forster .249" neck bushing (BUSH-249)
Frequently Asked Questions
Which dies does the Forster .249" neck bushing fit?
This bushing is made for Forster's Bushing Bump Neck Sizing Dies and Bushing Full Length Sizing Dies. Forster bushings are proprietary, running taller with a conical base and a larger outside diameter than other brands. Because of that shape, Redding, Wilson, and RCBS bushings won't seat correctly in a Forster die, and this Forster bushing is built to drop right into one.
How do I know if .249" is the right bushing size for my loads?
A reliable method is to measure the outside neck diameter of a few loaded cartridges and subtract about .002" to get your bushing number. Bushings come in .001" increments, so you can fine-tune neck tension to your brass. Keep in mind that brass work-hardens after several firings and may call for a slightly smaller bushing to hold the same bullet grip.
Why use a neck bushing instead of a standard expander ball?
A bushing sizes the neck down only as much as needed based on your brass wall thickness, so you aren't overworking the metal. That means less stress on the neck, longer case life, and more consistent seating pressure from round to round. Precision and benchrest reloaders like the control it gives over neck tension.
Is the Forster .249" bushing sold individually or in a set?
This listing is for a single .249" bushing. It's handy if you already run a Forster bushing die and want to add a specific size or dial in your neck tension. Many reloaders keep a few neighboring sizes on hand so they can adjust as their brass ages.




Reviews
There are no reviews yet.