Description
Neck tension is one of those little details that separates ammo that shoots from ammo that just goes bang, and a bushing die setup gives you control over it. This is the Redding .226" heat-treated steel bushing, part number 73226, cut to a precise .226" sizing diameter so you can size your case necks down to exactly what your brass and bullets call for. Instead of overworking the neck like a standard one-size die does, you pick the bushing that matches your loaded round and let the brass do less work. That means longer case life and more consistent seating pressure round after round.
How the .226" Steel Neck Bushing Works
The idea is simple once you've measured a loaded cartridge. You take the outside neck diameter of a round with a bullet seated, then subtract one to two thousandths for brass spring-back and bullet grip. If that math lands you at .226", this is your bushing. Redding builds these in .001" increments across the whole range from .185" up to .368", so dialing in the exact tension you want is just a matter of grabbing the right size. Each one is clearly marked with its diameter, so there's no guessing when you pull it out of the box.
Fit and Build on the Redding .226 Bushing
Every Redding bushing shares the same external footprint, a 1/2" outside diameter by 3/8" long, so this one drops straight into any Redding bushing-style neck sizing die, including the Type S and Competition dies. The steel version is heat treated with the sizing diameter hand-polished to a surface hardness of Rc 60-62, which keeps friction down and makes the sizing stroke smooth. It also interchanges with other popular bushing dies on the market, so it's a flexible piece to have in your reloading kit if you run more than one setup.
For precision handloaders chasing tight groups, having a spread of bushings on the bench lets you fine-tune tension to a specific load, and this .226" fills a common spot in that lineup.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73226
- UPC: 611760732263
- Bushing Diameter: 0.226"
- Material: Heat-Treated Steel
- Surface Hardness: Rc 60-62
- Sizing Diameter Finish: Hand-Polished
- Outside Diameter: 1/2"
- Length: 3/8"
- Fitment: Redding Bushing-Style, Type S and Competition Neck Sizing Dies
- Size Range Offered: .185" to .368" in .001" increments
- Quantity: 1 Bushing
- Country of Origin: USA
What’s Included
- One Redding .226" heat-treated steel neck sizing bushing (PN 73226)
Frequently Asked Questions
How do I know if the .226" bushing is the right size for my load?
Measure the outside diameter of a loaded cartridge neck with a bullet seated, using a precision micrometer. Subtract one to two thousandths to account for brass spring-back and bullet tension. If that number comes out to .226", this is the bushing you want.
Will this Redding steel neck bushing fit my die?
It fits any Redding bushing-style neck sizing die, including the Type S and Competition models, thanks to its standard 1/2" outside diameter by 3/8" length. It also interchanges with other common bushing dies on the market. If your die uses this universal bushing format, this one drops right in.
What's the difference between the steel bushing and the titanium nitride version?
Both start as the same heat-treated steel bushing with the sizing diameter hand-polished to Rc 60-62 hardness. The titanium nitride version adds a surface coating that increases hardness even more and reduces sizing friction. The plain steel bushing here does the same sizing job and is the standard choice for most handloaders.
Why use a bushing instead of a standard neck sizing die?
A standard die sizes every neck to one fixed diameter, which often overworks the brass. A bushing lets you choose exactly how much to squeeze the neck, giving you just the right amount of tension to hold the bullet without excessive sizing. That means more consistent seating and longer case life.




Reviews
There are no reviews yet.