0
0

Redding .225″ Heat-Treated Steel Neck Sizing Bushing (73225)

UPC: 611760732256

$20.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're reloading a .20 caliber cartridge and chasing tight, repeatable neck tension, the Redding .225" steel neck bushing is one of those small parts that makes a real difference at the bench. Instead of overworking your brass with a traditional sizing die, a bushing setup lets you size the neck down just enough to grip the bullet properly without beating up the case. That means longer brass life and more consistent seating from round to round.

What the .225" Steel Bushing Brings to the Bench

This bushing is machined from heat-treated steel, and the sizing diameter is hand-polished to a surface hardness of Rc 60-62. That hardness and polish do two things: they cut down the effort it takes to run brass through the die, and they hold up over a lot of reloading cycles without wearing out of spec. Like all Redding steel bushings, it carries the standard 1/2" outside diameter and 3/8" length, and the .225" size is clearly marked right on the bushing so there's no second-guessing which one you grabbed.

Fitting the Redding .225" Neck Bushing to Your Dies

These drop freely into any Redding bushing-style neck sizing die, including the Type S and Competition dies, and they also interchange with Wilson-style bushings if that's what you're running. The bushing floats in the die so it self-centers on the case neck, which is a big part of why this system produces such low runout.

Picking the Right Size

Sizing selection is simple once you know the drill. Measure the outside neck diameter of a loaded round with a good micrometer, then subtract about .001" to .002" to account for brass springback and the grip you want on the bullet. If you're running moly-coated bullets, you may want to step down a thousandth or two more. Redding builds these in .001" increments across the full range, so whatever neck tension your load wants, there's a bushing to match it.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73225
  • UPC: 611760732256
  • Bushing Size (I.D.): 0.225"
  • Caliber: .20 Cal
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62
  • Outside Diameter: 1/2" (0.500")
  • Length: 3/8" (0.38")
  • Finish: Hand-Polished Sizing Diameter
  • Compatibility: Redding bushing-style dies, interchanges with Wilson-style bushings

What’s Included

  • One Redding .225" heat-treated steel neck sizing bushing (73225)

Frequently Asked Questions

Which dies does the Redding .225" steel neck bushing fit?

It drops freely into all Redding bushing-style neck sizing dies, including the Type S and Competition dies. It also interchanges with Wilson-style bushings, so you've got flexibility if you run more than one setup. The bushing floats in the die and self-centers on the case neck.

How do I know if .225" is the right bushing size for my load?

Measure the outside neck diameter of a loaded round with a precision micrometer, then subtract about .001" to .002" to allow for brass springback and bullet grip. If that math lands you around .225", this is your bushing. For moly-coated bullets, you may want to step down an extra thousandth or two.

What's the advantage of a bushing over a standard neck sizing die?

A bushing lets you size the neck down just enough to hold the bullet without overworking the brass. That means you get the exact neck tension you want, less runout, and longer case life. It's a favorite approach for precision handloaders who care about consistency.

Is the steel bushing better than the titanium nitride version?

The steel version is heat-treated and hand-polished to Rc 60-62, which gives smooth, low-effort sizing and great durability. The titanium nitride bushings add a coating that further reduces friction, but the steel bushings are the proven, cost-effective standard that plenty of reloaders rely on. Both share the same dimensions and interchange in the same dies.

Additional information

UPC

611760732256

Manufacturer

Manufacturer Part Number

73225

Reviews

There are no reviews yet.

Be the first to review “Redding .225″ Heat-Treated Steel Neck Sizing Bushing (73225)”