Description
If you've added the Outside Neck Turner accessory to your Forster case trimmer and you're loading .224 brass, this is the pilot that makes it all work. The OT2224 drops into the trimmer in place of the regular case trimmer pilot and acts as the mandrel your case neck rides on while the cutter shaves it to a consistent wall thickness.
Neck turning matters more than a lot of folks realize. When a case neck is thicker on one side than the other, the bullet gets released unevenly at ignition, and that little bit of misalignment between bullet and bore can quietly rob you of accuracy. Turning the outside of the neck concentric to the case's true axis evens out that wall thickness so every round lets go of its bullet the same way. For precision and benchrest loaders working the .22 centerfire cartridges, that consistency is the whole point.
How the OT2224 .224 Pilot Is Built
This pilot is hardened steel and precision-ground, sized .0020 to .0025 inches under bullet diameter so your brass sits snug without binding. That small undersize is intentional and standard across Forster's pilot lineup, giving the neck something firm to index against while the cutter does its work. The hardened surface holds its dimension through plenty of use.
Matching the .224 Neck Turner Pilot to Your Setup
Keep in mind this pilot is made for the Forster Outside Neck Turner attachment, not a standalone tool. The .224 size is spec'd for .224 diameter bullets, which covers the common .22 centerfire family like .223 Remington, .22-250, .220 Swift and similar. If you reload more than one bullet diameter, Forster offers pilots across a wide range of sizes, so you can build out a set and turn necks for all your calibers from the same trimmer.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: OT2224
- UPC: 757253005121
- Caliber: .22 Caliber
- Pilot Diameter: .224 (for .224 diameter bullets)
- Material: Hardened, precision-ground steel
- Undersize Tolerance: .0020 to .0025 under bullet diameter
- Compatibility: Forster Outside Neck Turner accessory
- Type: Outside neck turner pilot / mandrel
What’s Included
- One Forster .224 Outside Neck Turner Pilot (OT2224)
Frequently Asked Questions
What does the .224 Outside Neck Turner Pilot do?
It acts as the mandrel your case neck rides on while the cutter trims the outside of the neck to an even wall thickness. Replacing uneven neck walls with consistent ones helps the bullet release uniformly at ignition, which improves concentricity and accuracy. It installs in place of your standard Forster case trimmer pilot.
Is the OT2224 pilot a complete neck turning tool?
No, it's just the pilot. It's made to be used with the Forster Outside Neck Turner accessory mounted on a Forster case trimmer. You'll need that attachment and trimmer for this pilot to do its job.
Why is the pilot smaller than .224?
Forster pilots are precision-ground .0020 to .0025 inches under bullet diameter on purpose. That slight undersize lets the case neck slip onto the mandrel snugly without binding, so the brass indexes correctly while the cutter shaves it. It's the same standard Forster uses across their entire pilot range.
Which cartridges does the .224 pilot cover?
The .224 size is spec'd for .224 diameter bullets, so it works with the common .22 centerfire cartridges like .223 Remington, .22-250 Remington and .220 Swift. If you load other diameters, Forster makes matching pilots in a wide spread of sizes so you can turn necks for all your calibers.



Reviews
There are no reviews yet.