0
0

Forster NR1017 .1730″ Inside Neck Reamer for .17 Caliber Brass

UPC: 757253004841

$31.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you load for a .17 and you've ever slid a bullet into a fired, unsized neck only to feel it drag, this is the tool that fixes it. The Forster NR1017 Inside Neck Reamer is cut for .172" bullets and finishes the inside of your case necks to .1730", pulling out the excess brass that builds up on thick necks. That extra brass is what causes high chamber pressure and the random flyers that drive precision loaders crazy, so taking it out of the equation makes a real difference on paper.

How the NR1017 Neck Reamer Works

This reamer mounts in the cutter of a Forster Case Trimmer in place of the pilot, so it rides true and centered as it cuts. It's ground roughly .0025" to .003" over maximum bullet diameter, which leaves just the right amount of clearance for a clean bullet fit. The staggered tooth design is the standout here, cutting brass smoothly without the chatter you get from lesser tools, and it's machined from high grade, wear-resistant tool steel so it holds its edge over a lot of cases.

Using the .1730" Inside Neck Reamer the Right Way

Timing matters with neck reaming. You want to ream after the case has been fired with a full load and before you neck size or full-length size, not the other way around. The old shop rule is simple: ream after firing, turn after sizing. A quick way to check if you even need it is to slide a bullet into a fired, unsized neck and feel how much the brass grips.

One important note for .17 shooters: because of its smaller shank, the NR1017 requires the 17 Caliber Cutter Shaft (CT1010-CTC417) to run in your trimmer. If you don't already have that shaft, plan to grab one alongside the reamer so you're ready to go on the bench.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: NR1017
  • UPC: 757253004841
  • Caliber: .17 Caliber (.172" bullet)
  • Reamer Diameter: 0.1730"
  • Material: High grade, wear-resistant tool steel
  • Tooth Design: Staggered tooth for chatter-free cutting
  • Grind Tolerance: Ground .0025" to .003" over max bullet diameter
  • Compatibility: Forster Original, Classic, and Power Case Trimmers
  • Required Accessory: 17 Caliber Cutter Shaft (CT1010-CTC417)
  • Use Timing: After firing, before sizing

What’s Included

  • .1730" Inside Neck Reamer (NR1017)

Frequently Asked Questions

What does the Forster NR1017 inside neck reamer do?

It removes excess brass from the inside of your .17 caliber case neck walls. Thick necks can cause high chamber pressures and flyers, so reaming them back to a consistent thickness helps your loads shoot more accurately. The reamer finishes the inside of the neck to .1730" for a proper fit with .172" bullets.

Does the NR1017 reamer need any extra parts to use it?

Yes. Because of its smaller shank diameter, the 17 caliber reamer requires the 17 Caliber Cutter Shaft (CT1010-CTC417) to run in your Forster Case Trimmer. If you don't already have that shaft, you'll want to pick one up so the reamer mounts correctly.

When should I ream the necks versus size them?

Ream after the case has been fired with a full load and before any neck or full-length sizing. The general rule of thumb is ream after firing, turn after sizing. Doing it in the wrong order won't give you the clean, consistent necks you're after.

Which Forster trimmers work with this neck reamer?

The reamer mounts in the cutter of the Forster Original, Classic, and Power Case Trimmers, replacing the pilot. It's built from wear-resistant tool steel with a staggered tooth design that cuts brass smoothly without chatter. Just remember the .17 version also needs the 17 Caliber Cutter Shaft.

Additional information

UPC

757253004841

Manufacturer

Manufacturer Part Number

NR1017

Caliber/Gauge

.17 Caliber (.172)

Reviews

There are no reviews yet.

Be the first to review “Forster NR1017 .1730″ Inside Neck Reamer for .17 Caliber Brass”