0
0

Luth-AR .308 Firing Pin Stainless Steel for AR-10 DPMS Pattern BCG

UPC: 859992007944

$11.99

12 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The firing pin is one of those small parts that nobody thinks about until a rifle goes click instead of bang. This Luth-AR .308 firing pin is a factory replacement component designed for DPMS pattern bolt carrier groups, machined from stainless steel and finished in chrome so it strikes clean, resists corrosion, and wipes down easily after a long range day. It's a simple, no-nonsense part that does exactly what a firing pin should do: transfer the hammer's energy into a reliable primer hit, every round.

What Makes This Luth-AR .308 Firing Pin Tick

Luth-AR traces its roots back to Randy Luth, the machinist who founded DPMS/Panther Arms, so this is a company with deep history in the .308 AR world. The pin is built for DPMS style and spec bolts, which is the same family most people mean when they say LR-308 or SR-25 pattern. The tip measures .075 inches, which matches standard DPMS spec bolts. It is not the smaller .065 inch tip used in some high-pressure or small diameter firing pin hole bolts, so it won't fit those setups.

Fitting the .308 Firing Pin Into Your Build

Installation is straightforward if you've been inside a bolt carrier group before. With the firearm unloaded, pull the BCG, drive out the firing pin retention pin with a punch, slide the old pin free, drop this one in, and reinstall the retainer. No fitting or gunsmithing required for a proper DPMS pattern bolt. Made in the USA and roughly 3.94 inches in overall length, it's a sensible spare to toss in your parts box or range bag. A firing pin is cheap insurance, and having a known-good replacement ready beats hunting one down the day your range trip gets cut short.

If you're running an Armalite-pattern AR-10 rather than a DPMS/LR-308 platform, double check your bolt before ordering, since those two families don't share the same firing pin.

Key Specifications

  • Manufacturer: Luth-AR
  • Manufacturer Part Number: 308-BT-14
  • UPC: 859992007944
  • Model: Firing Pin
  • Product Type: Firing Pin
  • Caliber: .308 Winchester
  • Platform: AR-10 / .308 DPMS Pattern
  • Bolt Compatibility: DPMS style and spec bolts
  • Tip Diameter: .075 in
  • Overall Length: Approx. 3.94 in
  • Material: Stainless Steel
  • Finish: Chrome
  • Color: Silver
  • Country of Origin: Made in USA

What’s Included

  • Luth-AR .308 Firing Pin (308-BT-14)

Frequently Asked Questions

Will the Luth-AR .308 firing pin fit my AR-10 bolt?

It's made for DPMS style and spec bolts, which covers most modern .308 AR platforms often called LR-308 or SR-25 pattern. It is not designed for original Armalite-pattern AR-10 bolts, which use different dimensions. When in doubt, confirm your bolt follows the DPMS pattern before ordering.

Does this firing pin work with high-pressure or small diameter bolts?

No. This pin has a .075 inch tip that matches standard DPMS spec bolts. It won't fit bolts with the smaller firing pin hole, such as the .065 inch style found on some high-pressure bolts, so check your bolt's firing pin hole if you're unsure.

What is the Luth-AR .308 firing pin made of?

It's machined from stainless steel with a chrome finish. That combination resists corrosion and wipes down easily, which helps keep carbon buildup from gumming up the works inside your bolt carrier group.

Is this firing pin hard to install?

Not at all if you've disassembled a bolt carrier group before. With the firearm unloaded, remove the BCG, punch out the firing pin retention pin, swap the old pin for the new one, and reinstall the retainer. No fitting or gunsmithing is needed for a proper DPMS pattern bolt.

Additional information

UPC

859992007944

Manufacturer

Manufacturer Part Number

308-BT-14

Color

Silver

Model

Product Type

Firing Pin

Reviews

There are no reviews yet.

Be the first to review “Luth-AR .308 Firing Pin Stainless Steel for AR-10 DPMS Pattern BCG”