Description
Remington's semi-auto rifles like the 4, 74, and 7400 are great woods guns, but they don't come with a spot to hang a bipod. That's exactly the problem the Harris No. 3 Adapter solves. It installs at the end of the fore-end and creates a proper swivel stud, so you can clamp on any Harris bipod and get the kind of steady hold these rifles normally can't offer off a bench or in a prone setup.
How the Harris No. 3 Adapter Mounts Up
The No. 3 is a two-part setup: a base and a fore-end screw. It attaches at the end of the fore-end and replaces the factory fore-end screw, so you're not drilling or hacking up your stock to get a mounting point. Keep in mind that some installs may call for a little minor inletting to get everything sitting flush, which is normal for a part that has to fit a specific rifle's wood or synthetic fore-end. Always make sure the rifle is unloaded before you start.
Built From Steel and Made in the USA
Harris has been the benchmark name in bipods since 1979, and their adapters are machined to tight tolerances so the fit between your Remington and your bipod is snug and repeatable. This one is cut from steel with a matte black finish that blends in with factory bluing and stands up to hard field use. It's a small part, but it's the link that holds your whole bipod setup together, and Harris doesn't cut corners on it.
What the No. 3 Adapter Fits
The No. 3 is made specifically for the Remington Models 4, 74, and 7400. Plenty of folks running the Remington 750 have had good luck with it as well, often adding a thin rubber shim between the adapter and the fore-end to snug up the gap, though that model isn't officially listed. If you're building out an old 7400 or want to turn a classic Remington semi-auto into a steadier hunting or range rifle, this adapter is the clean way to do it.
Key Specifications
- Manufacturer: Harris Engineering
- Manufacturer Part Number: NO. 3
- UPC: 051156000307
- Fits: Remington Models 4, 74 & 7400
- Configuration: Two-part base and fore-end screw
- Mounting: Replaces fore-end screw, adds swivel stud
- Material: Steel
- Finish: Matte Black
- Country of Origin: Made in the USA
- Weight: Approx. 4.8 oz
What’s Included
- Harris No. 3 adapter base
- Fore-end screw
Frequently Asked Questions
What rifles does the Harris No. 3 Adapter fit?
It's designed specifically for Remington semi-automatic rifles in Models 4, 74, and 7400. The adapter replaces the fore-end screw to create a swivel stud mounting point where there wasn't one before. Many owners report good results on the Remington 750 as well, though that model isn't officially listed by Harris.
Do I need a separate bipod to use this adapter?
Yes. The No. 3 is strictly the adapter that creates the swivel stud mount on your Remington. You'll pair it with any standard Harris bipod to complete the setup.
Does installing the Harris No. 3 Adapter require modifying the rifle?
The adapter attaches at the end of the fore-end and replaces the factory fore-end screw, so no major gunsmithing is needed for most installs. Some rifles may call for minor inletting to get the adapter sitting flush against the fore-end. Always confirm the rifle is unloaded before you begin.
Will the No. 3 Adapter work on my Remington 750?
It isn't officially listed for the 750, but plenty of owners have mounted it successfully on that rifle. The common trick is adding a thin strip of rubber between the adapter and the fore-end to take up the small gap and get a snug fit.





Reviews
There are no reviews yet.