Description
The Armaspec XPDW Stock Gen 2 is a PDW-style collapsible stock built to take a full-size AR-15 or SBR and shrink it down for storage, transport, and close-quarters work. It runs on an aluminum frame reinforced with hardened steel rods, so you get a compact profile that still holds up to real use. The body wears a Mil-Spec Type III Class 2 hard anodized black finish, which keeps it matching the rest of your standard AR hardware.
What makes this one easy to live with is that it mounts directly to a standard mil-spec carbine buffer tube. No proprietary buffer, no special tube, no cutting corners. That means you can throw it on an existing build without rethinking your whole setup, and pull it back off just as easily if you want to swap it between rifles.
Dialing In the XPDW Gen 2
Adjustment is 5-position with an ambidextrous release, so you can set your length of pull from either side without hunting for a lever. The low-profile aluminum latch carrier uses a steel lock engagement point, and you can deploy the stock two ways: run the ratcheting system to click it out position by position, or point the muzzle up, disengage the lock, and let gravity drop it open. It collapses to 6.878 inches and extends out to 10 inches, and the whole assembly weighs right around 14 to 16 ounces depending on how it's measured.
Why the XPDW Stock Works on an AR Build
There's a QD sling attachment point built into the butt, so you can run a single-point or two-point setup and transition cleanly. It's made in the USA and backed by a lifetime warranty, which tells you Armaspec stands behind the build. If you're after that compact PDW look and feel on a 5.56 carbine or short-barreled build, this is a clean, no-fuss way to get there.
Key Specifications
- Model: XPDW
- Manufacturer: Armaspec
- MPN: ARM235-BLK
- UPC: 810048490332
- Color/Finish: Black, Mil-Spec Type III Class 2 Hard Anodized
- Material: Aluminum with hardened steel rods
- Adjustment: 5-position, ambidextrous
- Collapsed Length: 6.878 in
- Extended Length: 10 in
- Weight: Approx. 14.29 oz
- Buffer Tube Compatibility: Standard Mil-Spec carbine
- Sling Mount: QD attachment point
- Platform: AR-15 / SBR (.223/5.56)
- Country of Origin: USA
- Warranty: Lifetime
What’s Included
- 1x Armaspec XPDW Gen 2 Stock Assembly
- 1x Hex Wrench
- 1x Set Screw
Frequently Asked Questions
Does the Armaspec XPDW Gen 2 need a special buffer tube?
No. The XPDW Gen 2 mounts directly to a standard mil-spec carbine buffer tube with no proprietary buffer or tube required. That makes it a straightforward swap onto most existing AR-15 builds. You will not need to rework your buffer system to run it.
How does the XPDW Gen 2 deploy and adjust?
It uses a 5-position ambidextrous adjustment that you can run from either side of the rifle. You can deploy it with the ratcheting system to click out position by position, or point the muzzle up, disengage the lock, and let it drop open under gravity. It collapses down to 6.878 inches and extends to 10 inches.
Does the Armaspec XPDW Gen 2 have a sling mount?
Yes. There is a QD sling attachment point built into the butt of the stock. That lets you run a single-point or two-point sling and transition cleanly between shooting positions.
What is the XPDW Gen 2 stock made of and is it durable?
The body is lightweight aluminum reinforced with hardened steel guide rods, finished in Mil-Spec Type III Class 2 hard anodized black. That combination keeps the weight down while standing up to hard use. Armaspec also backs it with a lifetime warranty.






Reviews
There are no reviews yet.