Description
The Armaspec FT90 is an ambidextrous, 90-degree full-throw safety selector built for AR-15 and AR-10 lowers running standard mil-spec markings. It swaps out your factory selector for levers you can reach from either side of the receiver, which is a big deal if you shoot support side, run the gun lefty, or just want quicker access without breaking your firing grip. The action is smooth with a defined, crisp lockup, so you get a clean feel between safe and fire every time you flip it.
What Sets the FT90 Apart
Armaspec went with aluminum levers mounted to a steel core, so you get the lighter feel and anodized color up top without giving up the durability of a steel wear surface where it counts. The blue anodizing isn't just for looks either. A splash of color on the levers makes a quick visual safe-check easy, which plenty of builders appreciate on a range gun. It's made in the USA and backed by a lifetime warranty.
Fitting the FT90 to Your Build
This one is a straightforward install for most AR builders. The levers thread onto the core with set screws, and the whole swap takes just a few minutes once your lower is open. A quick tip from folks who have run these: hit the screws with a dab of blue thread locker during install so they stay put over a long range session. It fits lowers chambered in 5.56/.223 as well as 7.62/.308, so it works across both the AR-15 and AR-10 platforms.
Whether you're finishing a fresh build or upgrading a tired factory selector, the FT90 is a simple, dependable way to add ambi control to your rifle. It's an easy win for shooters who want faster, more natural manipulation on both sides of the gun.
Key Specifications
- Manufacturer: Armaspec
- Model: FT90
- Manufacturer Part Number: ARM111-BLU
- UPC: 810048490783
- Type: Ambidextrous Safety Selector
- Throw: 90 Degree Full Throw
- Color/Finish: Blue
- Lever Material: Aluminum
- Core Material: Steel
- Compatibility: AR-15 and AR-10 mil-spec lowers
- Caliber Platforms: 5.56/.223 and 7.62/.308
- Hand: Ambidextrous
- Country of Origin: USA
- Warranty: Lifetime
What’s Included
- Armaspec FT90 Full Throw Ambidextrous Safety Selector (Blue)
Frequently Asked Questions
What rifles does the Armaspec FT90 safety selector fit?
The FT90 is built for AR-15 and AR-10 lower receivers that use standard mil-spec markings. It covers both the 5.56/.223 and 7.62/.308 platforms, so it works across most common AR builds. As long as your lower is cut to mil-spec, this one drops right in.
Is the FT90 a true ambidextrous selector?
Yes, it's a full ambi design with levers on both sides of the receiver. That means you can flip the safety from either side, which is a real plus for left-handed shooters or anyone who wants faster support-side control. The 90-degree full throw gives you a clear, defined motion between safe and fire.
Is the Armaspec FT90 hard to install?
Not at all. For most AR builders it's a quick swap once the lower is open, with the levers threading onto the core using set screws. A good tip is to add a dab of blue thread locker on the screws during install so they stay tight through heavy use.
What is the FT90 made of?
It uses aluminum levers paired with a steel core, which keeps the color and lighter lever feel up top while putting steel where the wear happens. The blue finish is anodized rather than painted, so it holds up well. It's made in the USA and carries a lifetime warranty.



Reviews
There are no reviews yet.