Description
Spot Hogg took the DNA that made the Fast Eddie a favorite and trimmed it down into the Boonie, running about 10 percent lighter while keeping the tank-like durability the brand is known for. This PM version is the Picatinny mount configuration, so it attaches directly to the front of a modern Picatinny-equipped riser instead of hanging off a long extension bar. Pulling the sight in closer to the riser improves balance, cuts bulk, and gives you a rock-solid connection that stays put shot after shot. This is the left hand model wearing a single .019 fiber pin.
What the ROTI Housing Brings to the Boonie PM
ROTI stands for Reach Out and Touch It, and it's the headline feature on the 2026 Boonie lineup. The housing accepts an interchangeable pin insert that indexes in 90-degree increments, so you can run your pin in a traditional up orientation, a horizontal side-pin, or a drop-pin setup based on what your eye likes best. Thanks to tight manufacturing tolerances, the inserts seat the same way every time, which means you can swap or reorient without chasing your zero all over again. One insert comes included, and additional configurations are sold separately if you want to build out the system down the road.
Dialing In the Boonie PM .019 Left Hand
Adjustment is where Spot Hogg sights earn their reputation. You get micro-adjustable 2nd and 3rd axis for leveling, coarse horizontal and vertical travel for getting roughed in, and improved horizontal micro-adjustment with positive clicks for fine windage tuning. The .019 fiber pin is a great middle-ground diameter: bright and easy to pick up in low light without covering too much of the target at distance. The yardage wheel uses an upgraded lock-down knob, and the whole sight is machined from 6061 aluminum to shrug off the beating that comes with backcountry hunts and 3D courses.
A Sight That Grows With You
The modular sight bar design means this same body can convert to other Boonie mounting styles if your rig changes. Pair that with the swappable ROTI inserts and removable yardage wheel, and you've got a sight that adapts to hunting season, 3D shoots, and long-range work without forcing you to start from scratch each time.
Key Specifications
- Manufacturer: Spot Hogg
- Model: Boonie PM w/ROTI
- Manufacturer Part Number: BPM1LH19ROTI
- UPC: 879655002765
- Mount Style: Picatinny (PM)
- Number of Pins: 1
- Pin Diameter: .019 inch
- Hand Orientation: Left Hand
- Housing: ROTI Modular (Reach Out and Touch It)
- Pin Indexing: 90-degree increments (up, down, or horizontal)
- Axis Adjustment: Micro-adjustable 2nd and 3rd axis
- Construction: 6061 Aluminum
- Weight: Approx. 11.1 oz (Picatinny single/double pin)
- Category: Bow Sight
What’s Included
- Spot Hogg Boonie PM sight with ROTI housing
- One ROTI single pin insert (.019 fiber)
- Picatinny mount bracket
- Removable yardage wheel/knob
- Sight tape kit
Frequently Asked Questions
What does the ROTI housing on the Boonie PM actually do?
ROTI stands for Reach Out and Touch It, Spot Hogg's modular pin housing that's standard across the 2026 Boonie line. It accepts interchangeable pin inserts that index in 90-degree increments, so you can run your pin up, down, or horizontal depending on what your eye prefers. Because the inserts seat with tight tolerances, you can swap or reorient the pin and return to the same zero.
Does the Boonie PM fit any bow, or does it need a Picatinny rail?
The PM stands for Picatinny Mount, so this version is built to attach directly to risers that have an in-line Picatinny sight system. Mounting straight to the riser pulls the sight in close for better balance and a solid connection. If your bow does not have a Picatinny rail, you would want the dovetail or hard mount version instead.
Is this sight set up for a left handed shooter?
Yes, this specific model is the left hand configuration. Spot Hogg builds the Boonie in both right and left hand, so left handed archers get a sight picture and adjustment layout dialed in for them rather than a right hand setup flipped around.
Why choose the .019 pin over the smaller .010 option?
The .019 fiber pin is a popular all-around choice because it gathers more light and stays bright and easy to find in low-light conditions like early morning or last light. The trade-off is slightly more coverage of the target at long range. For hunting and general use the .019 is a great pick, while competitive target and 3D shooters often lean toward the finer .010.







Reviews
There are no reviews yet.