Description
These are the same 200 grain open tip projectiles Winchester seats in their factory .300 Blackout loads, sold as loose component bullets so you can build your own rounds at the bench. The MPN here is WB300B200X, a box of 100 .308" diameter bullets meant for the handloader who wants to dial in a subsonic recipe without paying for finished ammo. If you run a .300 AAC Blackout and like controlling your own powder charge and seating depth, this is a straightforward, proven projectile to work with.
What Makes the WB300B200X Open Tip Tick
Don't let the open nose fool you into thinking hollow point. The cavity at the tip is a byproduct of how the lead core gets poured into the jacket, which lines everything up for better concentricity and tighter groups downrange. These are not expanding bullets, so terminal performance lands closer to an FMJ. The fully jacketed flat base is the real story for suppressor guys, since it keeps hot gasses off the lead core and cuts down on the gunk that builds up in your barrel and baffles.
Loading the 200gr .300 Blackout Projectile
At 200 grains, this bullet is heavy for the caliber on purpose. That extra mass is what keeps a properly worked-up load sitting comfortably under the speed of sound, which is exactly what you want for quiet, suppressed shooting. Heavy subsonic bullets like this one also sidestep the transonic instability that can open up groups, so a good handload tends to print consistently. Always start low and work up using published .300 Blackout data for a 200 grain bullet, and watch your seating depth given the stubby Blackout case.
Winchester's components carry the same quality control behind their loaded ammo, so lot-to-lot consistency is dependable. For folks already set up to reload .300 Blackout, a box of 100 of these gives you a solid foundation for a quiet range or plinking load.
Key Specifications
- Manufacturer: Winchester
- Manufacturer Part Number (MPN): WB300B200X
- UPC: 020892643031
- Product Type: Reloading Bullets (Component Projectiles)
- Caliber: .300 AAC Blackout
- Bullet Diameter: .308"
- Bullet Weight: 200 Grain
- Bullet Style: Open Tip
- Base Design: Fully Jacketed Flat Base
- Quantity: 100 Per Box
- Intended Use: Handloading Subsonic .300 Blackout
What’s Included
- 100 Winchester 200 grain .308" open tip component bullets
Frequently Asked Questions
Are these loaded rounds or just the bullets?
These are component bullets only, meaning the projectiles by themselves with no case, powder, or primer. You supply the brass, powder, and primers and assemble the finished cartridges on your reloading press. This is a box of 100 loose .308" diameter projectiles for handloading .300 Blackout.
Will the WB300B200X open tip bullet expand on impact?
No, this is not a hollow point despite the open nose. The cavity comes from how the lead core is seated into the jacket for better concentricity, not for terminal expansion. Terminal performance is similar to a standard full metal jacket, which makes it well suited to target and range handloads.
Is this 200 grain bullet good for subsonic .300 Blackout loads?
Yes, the heavy 200 grain weight is a popular choice for building subsonic loads. That added mass helps keep velocity under the speed of sound for quieter, suppressor-friendly shooting. Just be sure to follow published load data for a 200 grain .300 Blackout bullet and work up your charge carefully.
What bullet diameter are these for reloading?
These are .308" diameter projectiles, which is the correct bullet diameter for the .300 AAC Blackout. Make sure your dies and load data match this diameter and the 200 grain weight before you start seating bullets.




Reviews
There are no reviews yet.