Description
Bergara built its name on barrels, and the Premier HMR Pro is where that reputation earns its keep. This one wears a 24 inch 416 stainless steel barrel that gets extra honing at Bergara's facility in Spain before being Cerakoted in Tactical Gray and mated to the action in Lawrenceville, Georgia. The muzzle comes threaded 5/8×24 with a knurled protector, so adding a brake or a can is a five minute job. Chambering it in 25 Creedmoor was a smart move too. The quarter-bore Creedmoor pushes high BC .257 bullets that drift less in the wind than a 6.5 while recoiling noticeably softer, which makes it a genuinely fun cartridge to shoot all afternoon and a capable one for deer and similar game well past typical hunting distances.
What Sets the Premier HMR Pro Apart
The heart of the rifle is the Bergara Premier action, a two-lug design with a separate floating bolt head that keeps both lugs bearing evenly for consistent lockup, plus a coned bolt nose and sliding plate extractor for slick feeding and reliable brass removal. The bolt head, handle, shroud, and gas shield are nitrided, so the action stays smooth and shrugs off wear. A TriggerTech trigger with frictionless release technology handles the break, and the two-position safety lets you cycle the bolt and unload with the safety still on. The stainless receiver is drilled and tapped for Remington 700 pattern bases, so scope mounting options are everywhere.
A Stock That Fits Like It Should
The HMR molded stock, finished in black with gray specks, carries a full-length integrated mini-chassis for repeatable bedding and a truly free-floated barrel. An adjustable cheek piece and length of pull spacers let you dial in your fit, and QD flush cups plus swivel mounts cover slings and bipods without extra hardware.
Bergara HMR Pro 25 Creedmoor at the Bench and in the Field
Fed from a 5-round AICS-style detachable magazine and backed by Bergara's Premier series sub-MOA guarantee with quality factory ammo, this is one rifle that pulls double duty between the target line and the tree line without asking you to compromise on either.
Key Specifications
- Manufacturer: Bergara
- Model: Premier HMR Pro
- MPN: BPR20-25CM
- UPC: 043125000807
- Caliber: 25 Creedmoor
- Action: Bergara Premier Bolt Action, Two-Lug with Floating Bolt Head
- Barrel Length: 24"
- Barrel Material: 416 Stainless Steel, Hand Honed
- Muzzle: Threaded 5/8×24 with Knurled Thread Protector
- Finish: Tactical Gray Cerakote Barrel and Receiver
- Trigger: TriggerTech Frictionless Release Technology
- Capacity: 5+1, AICS-Style Detachable Magazine
- Stock: Bergara HMR Molded with Integrated Mini-Chassis, Black with Gray Specks
- Stock Adjustments: Adjustable Cheek Piece and Length of Pull Spacers
- Scope Mounting: Drilled and Tapped, Fits Remington 700 Bases with 8-40 Screws
- Sling Attachment: Integrated QD Flush Cups and Swivel Mounts
What’s Included
- Bergara Premier HMR Pro rifle
- One 5-round AICS-style detachable magazine
- Knurled thread protector (installed)
- Owner's manual
Frequently Asked Questions
How is the Premier HMR Pro different from the standard B-14 HMR?
The Pro is the step-up version built on Bergara's Premier action instead of the B-14 action, with a nitrided floating bolt head for smoother, more consistent lockup. It also upgrades to a TriggerTech trigger and a 416 stainless barrel that gets extra honing at the factory. The stock layout is similar, but the action, trigger, and barrel refinements are where your money goes.
Why pick 25 Creedmoor over 6.5 Creedmoor?
The 25 Creedmoor is the 6.5 case necked down to .257, and with modern high BC bullets it drifts less in the wind at distance while recoiling softer. It handles targets past 1,000 yards and is a solid deer cartridge at realistic hunting ranges. If you want one rifle for steel and whitetails without the thump of a bigger cartridge, it makes a strong case for itself.
Is the Bergara HMR Pro suppressor ready?
Yes. The 24 inch barrel comes threaded 5/8×24, which is the standard pitch for most .30 caliber and smaller suppressors and muzzle brakes. A knurled thread protector ships installed to keep the threads clean when you're running the bare muzzle.
What magazines and scope bases does this rifle take?
It feeds from AICS-pattern short action magazines, and one 5-round mag comes in the box, so spares are easy to find. The receiver is drilled and tapped for Remington 700 pattern bases using 8-40 screws, which opens up a huge range of rails and rings.




Reviews
There are no reviews yet.