Description
Redding built the Premium Series for handloaders who full length size and still want match-grade control over bullet seating. This 22 Creedmoor set brings together two of Redding's most requested upgrades in one package: a carbide sizing button in the full length die and the micrometer seating head normally found on their Competition seaters. If you're running a bolt gun in this fast, flat-shooting .224 wildcat, this is the kind of tooling that helps your groups tighten up.
What the Carbide Button Does in This 22 Creedmoor Die Set
The full length sizing die resizes the whole case body and bumps the shoulder back so your rounds chamber easily, while the carbide size button smooths the transition as the neck exits the die. That carbide surface makes expansion easier on new brass and cuts down on the drag you feel when working the necks. Because the 22 Creedmoor is often formed by necking down 6mm Creedmoor cases, a quality full length die does a lot of heavy lifting, and this one is up to it. The die also includes a decapping rod assembly to knock out spent primers as you size.
Dialing Seating Depth with the Redding Premium Micrometer Seater
The seating die carries a micrometer head that lets you adjust seating depth in increments of .001" or less, with a precision-ground stem for consistent seating from round to round. The real payoff is repeatability. Once you find a sweet spot for a given bullet, you can jot the number down and return to it later without guesswork. That matters with the 22 Creedmoor, where chambers and freebore can vary from one custom barrel to the next and seating depth becomes a real tuning tool.
Made in the USA, this set fits standard 7/8-14 threaded presses and gives reloaders a strong middle ground between a basic two-die set and a full competition setup. It's a smart pick for coyote rigs, varmint guns, and long-range builds alike.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 66302
- UPC: 611760663024
- Caliber: 22 Creedmoor
- Series: Premium Series
- Configuration: 2-Die Full Length Set
- Sizing Die: Full Length with Carbide Size Button
- Seating Die: Standard Seater with Micrometer Head
- Seating Adjustment: .001" increments or less
- Thread: 7/8-14
- Country of Origin: USA
- Shipping Weight: 1.3 lbs
What’s Included
- Full length sizing die with carbide size button
- Decapping rod assembly with sizing button and decapping pin
- Standard bullet seating die with micrometer seating depth head
- Precision-ground seating stem
Frequently Asked Questions
What's the difference between this Premium Series set and a standard Redding full length die set?
The standard set gives you a plain full length sizing die and a conventional seating die. This Premium Series set adds two upgrades: a carbide size button in the sizing die for smoother neck expansion and a micrometer head on the seater for fine seating depth adjustments. It's a step up in precision without jumping all the way to a full competition setup.
Can I use this 22 Creedmoor die set to neck down 6mm Creedmoor brass?
Yes. Many reloaders form 22 Creedmoor brass by running 6mm Creedmoor cases through a quality full length sizing die, and this die is built for that job. Lube your cases well and, depending on your chamber, you may need to set the die firmly against the shellholder to get proper shoulder bump. Factory 22 Creedmoor headstamped brass from makers like Hornady, Peterson, Alpha, and ADG is also widely available if you'd rather skip that step.
How fine can I adjust seating depth with the micrometer seater?
The micrometer head lets you adjust seating depth in increments of .001" or less. The big advantage is being able to return to a known setting for a specific bullet without trial and error. That kind of repeatability is a real help when tuning loads for accuracy.
Does this set include a neck sizing die?
No, this is the two-die full length set with the sizing die and seating die. If you want a dedicated neck sizing die included, Redding offers the Premium Deluxe three-die set for 22 Creedmoor, which adds a standard neck sizing die to these same two dies.





Reviews
There are no reviews yet.