Description
There is a lot to like about a magnum-class hunting rifle that does not fight you in the timber. The Browning X-Bolt 2 Hunter SPR chambers the flat-shooting 7mm PRC in a 20 inch sporter contour barrel, trimmed down specifically so you can add a suppressor without ending up with a pole vault. The muzzle comes threaded with a radial brake installed and a thread protector in the box, so you are covered whether you run a can, the brake, or a clean bare muzzle. A non-reflective matte blued finish keeps the metalwork subtle in the field, and the action is bedded at the recoil lug and action screws with a free-floated barrel for consistent accuracy from a cold bore.
The Vari-Tech Stock Sets This X-Bolt 2 Apart
The matte black synthetic Vari-Tech stock is the headline feature here, and for good reason. You can adjust length of pull with internal spacers for a solid, rattle-free feel, raise or lower the comb to line your eye up perfectly behind your scope, and swap between grip modules to change the grip angle to your liking. Rubber overmolded gripping surfaces keep your hands planted in cold or wet weather, and the thick Inflex recoil pad takes real sting out of the 7mm PRC. It is the kind of adjustability you would expect from a chassis rifle, packaged in a classic hunting stock.
Refined X-Bolt 2 Action and DLX Trigger
The second-generation receiver adds bolt guidance surface for noticeably smoother cycling, and the short 60 degree bolt lift clears big scope eyepieces while keeping follow-up shots quick. Browning's DLX trigger is a three-lever design with essentially zero creep, take-up, or overtravel, set at hunting weight from the factory and user adjustable. A top-tang safety with a bolt unlock button lets you check the chamber with the safety engaged, and the steel receiver is drilled and tapped for Browning's X-Lock scope mounting system, which uses four screws per base for a rock-solid optic setup. Feeding comes from a detachable rotary magazine holding three rounds, giving you 3+1 total capacity for elk, mule deer, or anything else 7mm PRC is built to handle.
Key Specifications
- Manufacturer: Browning
- Model: X-Bolt 2 Hunter SPR (Hunter Composite SPR)
- MPN: 036131298
- UPC: 023614870692
- Caliber: 7mm PRC
- Action: Bolt Action, 60 Degree Bolt Lift
- Barrel Length: 20"
- Barrel: Sporter Contour, Threaded Muzzle, Free-Floated
- Twist Rate: 1:8"
- Metal Finish: Matte Blued
- Capacity: 3+1, Detachable Rotary Magazine
- Stock: Matte Black Adjustable Vari-Tech Synthetic
- Trigger: Adjustable DLX Trigger
- Safety: Top-Tang with Bolt Unlock Button
- Optics: Drilled & Tapped for X-Lock Scope Mounts
- Hand: Right Hand
What’s Included
- Browning X-Bolt 2 Hunter SPR rifle
- One 3-round detachable rotary magazine
- Radial muzzle brake (installed)
- Thread protector cap
- Interchangeable grip module
- Owner's manual
Frequently Asked Questions
Is the X-Bolt 2 Hunter SPR ready for a suppressor out of the box?
Yes, that is the whole point of the SPR designation. The 20 inch barrel is shortened specifically to keep overall length manageable with a can attached, and the muzzle comes threaded with a radial brake installed plus a thread protector included. Just spin off the brake and thread on your suppressor.
How adjustable is the Vari-Tech stock on this rifle?
More than you would expect from a traditional-looking hunting stock. Length of pull adjusts internally with spacers so nothing rattles, the comb height raises or lowers to align your eye with your scope, and the grip module can be swapped to change grip angle. Rubber overmolding on the gripping surfaces helps in wet or cold conditions too.
What is the trigger like on the X-Bolt 2?
Browning's DLX trigger is a three-lever design that breaks with no creep, no take-up, and no overtravel. It comes from the factory set at a sensible hunting weight around 3.5 pounds and is user adjustable down to about 3 pounds. It is a genuinely crisp trigger for a factory hunting rifle.
Can I mount a scope on the X-Bolt 2 Hunter SPR, and does it come with bases?
The steel receiver is drilled and tapped for Browning's X-Lock mounting system, which uses four screws per base instead of the usual two for an extremely secure hold. Bases and rings are sold separately, so plan on picking up X-Lock mounts along with your optic. There are no iron sights on this rifle, so a scope is the way to go.


Reviews
There are no reviews yet.