Description
Sharps Bros built its reputation on turning polymer-framed carry guns into something that feels more like a custom firearm, and the Gen3 grip module for the P365 X-Macro is a good example of why. This version is machined specifically for X-Macro fire control units that use Sig's manual safety lever, so it drops right into place without any modification needed on that front. The whole module is cut from a single piece of 7075-T6 aluminum rather than molded plastic, which changes both how the gun feels and how it handles once rounds start going downrange.
What Sets This Gen3 P365 XMacro Grip Module Apart The Gen3 lineup brought real changes over earlier Sharps Bros modules, not just a new name. The grip panel texturing is more aggressive this time around, there's a redesigned steel lug system for a tighter fit against the fire control unit, and the frame now has provisions built in for adding a mag funnel down the road. Every edge on the module is radiused during machining, so instead of feeling boxy or sharp in hand, it comes across refined right out of the package.
Black Anodized Aluminum Paired With Cherry Wood Panels This particular version pairs a Mil-Spec black anodized finish with Brazilian cherry wood grip panels, giving it a look that stands out from the usual black polymer factory frame. Where the stock Sig module measures 1.1 inches across the grip, this one comes in at 1.3 inches, filling the hand more and giving you a steadier platform to work with. The added width isn't just cosmetic, it works alongside the module's extra weight, roughly 5.3 ounces versus the factory piece, to noticeably calm down felt recoil while you're shooting, without adding bulk that gets in the way while it's holstered.
Ergonomics Built Into The P365 X-Macro Grip Module Itself Ambidextrous thumb ledges run along both sides of the frame, giving either hand a natural spot to index against instead of forcing a one-handed design on lefty shooters. The trigger guard carries an undercut with finger grooves worked into the geometry, letting you choke up higher on the grip for better control. Keep in mind that because of those thumb ledges, most Kydex holsters built for the stock P365 X-Macro will need some minor heat reforming to seat this module properly, or you can look at holsters molded specifically for the Sharps Bros platform.
Key Specifications
- Manufacturer: Sharps Bros
- Model: Gen 3 (G3)
- Manufacturer Part Number: SBGM07-G3
- UPC: 850057873870
- Fits: Sig Sauer P365 X-Macro with manual safety FCU
- Material: Billet 7075-T6 Aluminum
- Finish: Mil-Spec black anodized
- Grip Panels: Brazilian cherry wood
- Grip Width: 1.3 inch (vs 1.1 inch factory)
- Approximate Weight: 5.3 oz
- Thumb Ledges: Ambidextrous, patented design
- Trigger Guard: Undercut geometry with finger grooves
- Lug System: Redesigned steel lug insert
- Magwell: Provisions for mag funnel installation
- Color: Black / Cherry
- Product Type: Grip Module
What’s Included
- Sharps Bros Gen3 grip module frame with black anodized finish
- Brazilian cherry wood grip panels, pre-installed
- Mounting hardware for fire control unit retention
Frequently Asked Questions
Will this Gen3 grip module fit my P365 X-Macro if it has the manual safety?
Yes, this specific version is machined with the cut needed for Sig's manual safety lever, so it's built for X-Macro fire control units that include that feature. If your X-Macro does not have a manual safety, you would want the standard non-safety Gen3 version instead.
Does the grip module come with a magazine release?
No, the magazine release assembly is not included with this grip module. You'll reuse the one from your factory grip frame, or pick up a replacement separately if needed.
Will my current holster still work with this installed?
Most likely it will need some adjustment. Because of the ambidextrous thumb ledges built into the frame, standard Kydex holsters made for the stock P365 X-Macro typically need minor heat reforming to seat correctly, or you can look at holsters made specifically for Sharps Bros grip modules.
How much does this actually change the way the P365 X-Macro shoots?
The extra width and roughly 5.3 ounces of added weight compared to the factory polymer module make a real difference in felt recoil, since more mass in the frame helps soak up the impulse on a small nine. That added heft is barely noticeable while it's riding in a holster, but it's noticeable the moment you start running strings on the range.







Reviews
There are no reviews yet.