0
0

Otis Ripcord 20 Gauge Pull-Through Bore Cleaner FG-RC-528

UPC: 014895018019

$13.99

8 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

A dirty barrel usually means digging out rods, patches, and a bench to work on. The Otis Ripcord skips all of that. It's a pull-through cleaner built specifically for the 20 gauge, with a molded rubberized core wrapped in braided Nomex fibers. You drop the weighted end down the breech, pull it through to the muzzle, and one pass does the work of a whole cleaning routine.

What Makes the 20GA Ripcord Different From a Bore Snake

The secret is the rigid, helix-shaped rubber core. Instead of a floppy rope that needs gravity to feed, this one is stiff enough to push into the chamber and its 3-bulb design keeps the cleaning surface pressed firmly against the bore the whole way through. The Nomex fibers do double duty here, working like a brush to loosen fouling and like a patch to capture it, so you get a genuine 360-degree clean rather than a surface wipe. Folks who've switched from a rod and patch setup tend to notice it's simply faster and easier, and it coils up small for storage.

Built for Cleaning While the Barrel's Still Hot

That braided Nomex surface shrugs off heat up to 700 degrees, which means you don't have to wait for the barrel to cool. Run a few rounds of clays or upland birds, pull the Ripcord through between strings, and keep going. It's the kind of maintenance that actually happens because it takes seconds, not a setup.

Threaded Ends That Grow With Your Kit

Both ends carry 8-32 threads, so the Ripcord fits every Otis cleaning component you already own or plan to add. Thread on a bore brush for a deeper scrub when you get home, or run it solo for a quick field clean. It's made in the USA and backed by Otis's no-nonsense limited lifetime warranty, so this is a buy-once tool. Toss one in your range bag, your truck, and your blind, and you'll never be caught without a way to clean your 20 gauge.

Key Specifications

  • Manufacturer: Otis Technology
  • Manufacturer Part Number: FG-RC-528
  • UPC: 014895018019
  • Gauge: 20 Gauge
  • Type: Pull-through one-pass bore cleaner
  • Core: Rigid helix-shaped molded rubberized core
  • Cleaning Surface: Braided Nomex fibers
  • Heat Resistance: Up to 700 degrees F
  • Thread Size: 8-32 threaded ends
  • Leading Edges: 3 for aggressive cleaning
  • Country of Origin: Made in USA
  • Warranty: No Nonsense Limited Lifetime Warranty

What’s Included

  • Otis 20 Gauge Ripcord pull-through bore cleaner

Frequently Asked Questions

How is the Otis Ripcord different from a regular bore snake?

The big difference is the rigid, helix-shaped rubber core inside the Ripcord. A standard bore snake is floppy and often relies on gravity to feed through the barrel, while the Ripcord's stiff core lets you push it into the breech and keeps the Nomex surface pressed firmly against the bore for a more aggressive, even clean. Many folks find it feeds faster and cleans more thoroughly in a single pass.

Can I use the 20 gauge Ripcord while my barrel is still hot?

Yes. The braided Nomex surface is rated to handle heat up to 700 degrees, so you can run it through between strings at the range or in the field without waiting for the barrel to cool. That's a big part of why it's such a handy quick-clean tool.

Does the Otis Ripcord work with other cleaning accessories?

It does. Both ends feature standard 8-32 threads, so it fits any Otis 8-32 cleaning component. You can thread on a bore brush or other attachments when you want a deeper clean beyond the standard pull-through.

Is the Ripcord reusable, and how do I clean it?

The Ripcord is fully reusable and built to last, backed by Otis's no-nonsense limited lifetime warranty. When it gets loaded with fouling, you can hand wash it with warm soapy water, let it dry, and it's ready for the next range trip. Just add your favorite CLP or solvent to the Nomex before a pass for the best results.

Additional information

UPC

014895018019

Manufacturer

Manufacturer Part Number

FGRC528

Reviews

There are no reviews yet.

Be the first to review “Otis Ripcord 20 Gauge Pull-Through Bore Cleaner FG-RC-528”