Description
There's a reason so many AR builders reach for a Daniel Defense muzzle device instead of settling for whatever came stock on the barrel. This Flash Suppressor Assembly takes the classic A2 birdcage look and updates it with a two-piece design borrowed from the nickel-steel hybrid suppressor systems used by military and law enforcement units. It's a straightforward upgrade for anyone running a 1/2×28 threaded 5.56 or .223 barrel who wants better flash control without changing the overall footprint of their rifle.
What Makes This Daniel Defense Flash Suppressor Assembly Different
Most flash hiders are one solid chunk of steel. This one splits into a front sub-assembly and a rear collar, which shaves off extra weight up front without sacrificing the durability you'd expect from a device that has to handle repeated blasts of hot gas. The elongated vents around the circumference direct gas and flame away from the shooter's line of sight, and the closed bottom keeps dust from kicking up when you're firing prone, a detail a lot of cheaper flash hiders skip entirely.
Materials Behind the Daniel Defense Flash Suppressor 12-28
Daniel Defense machines this piece from 17-4 aerospace grade stainless steel, then finishes it with a salt bath nitride process that leaves it resistant to rust and holds up well against carbon buildup over time. That combination is part of why Daniel Defense backs its muzzle devices with a full guarantee against material and workmanship defects.
Fit and Suppressor Compatibility
The standard length version comes in at 1.875 inches and uses 1/2×28 threads, making it a drop in fit for the vast majority of 5.56 and .223 AR-15 uppers on the market. If you're planning to run a suppressor down the road, this design was built to work with mounts like the Advanced Armament Omni, Gemtech Halo, and KAC NT-4 QDSS, so it's worth considering even if you're not adding a can right away. Made entirely in the USA, it's a solid, no fuss way to get factory quality flash control on a rifle that deserves better than a bargain bin muzzle device.
Key Specifications
- Manufacturer: Daniel Defense
- Manufacturer Part Number: 06-048-08061
- UPC: 815604013932
- Caliber: .223 Rem / 5.56x45mm NATO
- Thread Pitch: 1/2×28 TPI
- Length: 1.875 inches (Standard)
- Material: 17-4 Stainless Steel
- Finish: Salt Bath Nitride, Black
- Design: Two-piece Flash Suppressor Assembly
- Suppressor Mount Compatibility: Advanced Armament Omni, Gemtech Halo, KAC NT-4 QDSS
- Country of Origin: Made in USA
- Shipping Weight: 0.2 lb
What’s Included
- Daniel Defense Flash Suppressor Assembly (front sub-assembly and rear collar)
Frequently Asked Questions
Will the Daniel Defense Flash Suppressor Assembly fit my AR-15?
It's built with 1/2×28 threads, which is the standard thread pitch for most 5.56 and .223 AR-15 barrels. Always double check your specific barrel's thread spec before ordering since some rifles use 5/8×24 or other pitches.
Does this flash suppressor work with a suppressor mount?
Yes, the standard length 1/2×28 version is designed to work with mounts like the Advanced Armament Omni, Gemtech Halo, and KAC NT-4 QDSS. That makes it a good option if you think you might add a suppressor down the road without swapping muzzle devices later.
What's the difference between this and a regular A2 birdcage?
This Flash Suppressor Assembly uses a two-piece construction instead of one solid piece, which cuts down on weight while keeping the same flash reducing vent pattern. It also has a closed bottom to keep dust from being kicked up when shooting from the prone position.
Will this flash suppressor rust or corrode over time?
It's machined from 17-4 stainless steel and finished with a salt bath nitride coating, so it holds up well against corrosion and everyday carbon fouling. That combination is common on higher end AR components because it stands up to heat cycling from repeated firing.


Reviews
There are no reviews yet.