Description
If your shotgun has been fitted with Carlson's small-diameter Thinwall threading, this Full choke tube is the piece that lets you dial in a tighter pattern for longer shots. It's a flush mount design, so it sits right at the muzzle without adding bulk or catching on brush, and it drops right into barrels machined for the Thinwall thread specification rather than the more common Win-Choke or Rem-Choke patterns.
What Makes the Tru-Choke Thinwall Full Tube Different
Thinwall tubes use a .774 inch, 44 tpi thread that's specifically for barrels altered or built to accept this smaller diameter system. That's a different setup than standard Win-Choke or Rem-Choke threading, so it's worth double checking your barrel's choke system before ordering. Because of the thinner wall design, these tubes are built for 2-3/4 inch lead shot loads only, so keep steel and heavier magnum loads out of the rotation with this one.
Stainless Construction That Holds Up
Carlson's machines these tubes from 17-4 heat-treated stainless steel, a corrosion-resistant alloy that stands up to repeated cleaning and field use without pitting or rusting the way softer factory tubes sometimes do. The parallel section and internal taper are cut with the kind of consistency that comes from decades of pattern testing, so what you get is a tube that performs the way it's supposed to instead of one that's just close enough.
Full Constriction in the Field
A Full choke squeezes the pattern down tighter than Modified or Improved Cylinder, which means denser patterns at extended range. That makes it a natural fit for turkey hunters working with lead loads, pass shooting waterfowl, or anyone patterning clays at longer yardage where a wider spread starts losing pellets on target. It's not the choice for close flushes in thick cover, but for reaching out with lead shot, it earns its spot in the choke case.
Key Specifications
- Brand: Carlson's
- Manufacturer Part Number: 08046
- UPC: 723189080464
- Gauge: 12 Gauge
- Constriction: Full
- Choke System: Tru-Choke Thinwall (Small Diameter)
- Thread Specification: .774" – 44 tpi
- Material: 17-4 Stainless Steel, Heat Treated
- Mount Style: Flush Mount
- Approximate Length: 1.6 inches
- Recommended Shot Type: 2-3/4" Lead Shot Only
- Country of Origin: Made in USA
What’s Included
- 1 x Carlson's Tru-Choke Thinwall 12 Gauge Full choke tube
Frequently Asked Questions
Will the Tru-Choke Thinwall Full choke tube fit my shotgun?
This tube only fits barrels that have been machined or altered specifically for Carlson's small-diameter Thinwall thread pattern, which is different from standard Win-Choke or Rem-Choke systems. If your barrel came from the factory with a common choke system, check your existing tube's markings or measure the thread before ordering to make sure Thinwall is the right fit.
Can I shoot steel shot through this choke tube?
No, Thinwall tubes are built for 2-3/4 inch lead shot loads only due to the thinner wall design. Running steel shot through this constriction isn't recommended and can damage the tube or barrel over time.
What's the practical difference between Full and Modified constrictions?
Full choke squeezes the shot column down tighter than Modified, which produces denser patterns at longer range but a smaller overall spread. It's a good match for situations where birds or targets are further out and you want more pellets concentrated on target rather than a wider spread for close, fast shots.
What material is the Tru-Choke Thinwall Full tube made from?
Carlson's machines it from 17-4 heat-treated stainless steel, a corrosion-resistant alloy that holds up well to regular cleaning and field conditions. That stainless build helps the tube resist pitting and keeps the internal dimensions consistent shot after shot.




Reviews
There are no reviews yet.