Description
The Lee Precision 92412 is a two-die set built for reloaders who want consistent, factory-dimensioned 22 Creedmoor ammo without a lot of guesswork at the bench. The real star here is the micrometer bullet seating die, which lets you read and repeat your seating depth down to the thousandth. No more tweaking a seater screw by feel, measuring, and tweaking again. You set the number once, write it down, and come right back to it next loading session.
The full length sizing die resizes the whole case body and neck, which is exactly what you want when you're running new brass, mixed range pickups, or loading for more than one rifle. Full length sizing keeps your rounds chambering reliably, and it's the smart call for semi-auto actions and anything you want to feed without fuss. The dies use a standard 7/8-14 thread, so they'll thread right into the common presses from Lee, RCBS, Hornady, Lyman, and Dillon.
What the 92412 Micrometer Die Set Brings to the Bench
The micrometer seater uses a floating bullet guide that holds the case mouth and bullet in alignment while the bullet is seated, which cuts down on runout and helps every round sit true. The laser-engraved scale reads in .001 inch increments, and the fine-thread adjustment head with its friction O-ring holds its setting even through long loading runs. The body contacts the shell holder for dead length seating, so you get uniform depth cartridge after cartridge.
Built With the Lee Guarantee
Lee Precision has been machining reloading gear in the USA since 1958, and this set follows the same formula that's made them a bench staple: solid tools at a fair price. Everything in the box is ready to use, right down to the included load data to help you work up a starting recipe. Whether this is your first 22 Creedmoor setup or you're adding a dedicated precision seater to an existing bench, the 92412 gives you the control to tune your loads and the repeatability to keep them that way.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92412
- Model: 92412
- UPC: 734307924126
- Caliber: .22 Creedmoor
- Die Type: Full Length
- Set Size: 2-Die Set
- Thread: 7/8-14 (standard)
- Micrometer Increments: .001 inch
- Country of Origin: United States
- Shipping Weight: 1.0 lb
What’s Included
- Full Length Sizing Die
- Micrometer Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions with load data
Frequently Asked Questions
What's the difference between the full length die and a neck sizing die for 22 Creedmoor?
The full length sizing die in this 92412 set resizes the entire case body and neck, which is the right choice for new brass, mixed range brass, or loading for more than one rifle. It keeps rounds chambering reliably and is the first pick for semi-auto actions. If you want longest case life and are loading brass fired only in one bolt gun, Lee also offers a separate neck sizing die for that job.
Will the Lee 92412 dies fit my press?
Yes. These dies use the standard 7/8-14 thread, so they'll thread into common presses from Lee, RCBS, Hornady, Lyman, and Dillon. The set also comes with a universal shell holder that fits most presses.
What does the micrometer seating die actually do for me?
It lets you set your bullet seating depth precisely and read it off a laser-engraved scale in .001 inch increments. You can note your setting and return to it exactly on the next loading session, which saves the trial-and-error of measuring and adjusting by feel. The fine-thread adjustment head holds its setting even through long loading runs.
Do I need anything else to crimp my 22 Creedmoor loads?
This is a two-die set, so it doesn't include a crimp die. If you're loading for hunting or your magazine length keeps the bullet off the rifling, many reloaders add the Lee Factory Crimp Die for 22 Creedmoor to apply a firm crimp. The seating die can also seat and crimp in one operation when set up that way, but the dedicated Factory Crimp Die is a separate accessory.




Reviews
There are no reviews yet.