$266.99
19 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A red dot or holographic sight is fast up close, but the moment you bolt a magnifier behind it, you give up that quick, both-eyes-open speed. The LaRue LT755SEO fixes that. It's a pivot mount for EOTech's G23-pattern 3X magnifier that swings the glass in when you need to reach out and folds it clear when you want an unmagnified sight picture. The whole in-and-out motion takes about a second, no buttons or switches to fumble with.
The magnifier rides on an angled, spring-tensioned arm that rotates smoothly and snaps into a positive lock at both ends of travel. It takes a deliberate push to open and close it, which is exactly what you want, since it means the magnifier isn't going to flop out of position on its own during recoil or while you're moving. It sets the centerline of the magnifier at 1.725 inches above the rail, which lines up cleanly behind an EOTech running a 7mm riser for a proper cheek weld and a clear look through the glass.
This one is cut specifically for the EOTech G23 magnifier or anything sharing that exact footprint, and plenty of folks have had good luck running Vortex VMX-3T and similar magnifiers on it since they use the same mounting pattern. It bolts to the flat-top section of your rail behind the optic. Worth knowing: it's meant for the flat rail, not the raised rail section of an LT110 EOTech mount, so plan your layout accordingly.
LaRue's reputation is built on mounts that go on straight, stay put, and come back to zero, and this one carries that same standard. The aircraft-grade aluminum body with a hard-coat anodized finish shrugs off hard use, and the built-in QD clamp lets you pull it on and off a Picatinny rail without tools. It's a premium piece, but if you're already running quality EOTech glass, this is the mount that lets it earn its keep.
It's designed for the EOTech G23 3X magnifier or any magnifier that shares the exact same mounting footprint. A lot of users have successfully run Vortex VMX-3T magnifiers on it since they use the same pattern. If you're unsure about a specific magnifier, check that its base mounting holes match the G23.
No, the magnifier is sold separately. This is the mount only, and it includes the QD adjustment wrench, blue Loctite, and instructions. You'll pair it with your own G23-pattern 3X magnifier.
Yes. The spring-tensioned arm locks positively into place at both ends of travel and takes deliberate effort to open or close, so it won't flop out of position on its own. LaRue's QD clamp system is known for returning to zero when you remove and reinstall it.
It's meant to sit on the flat-top section of the rail behind your optic, not the raised rail portion of an LT110 EOTech mount. For proper alignment, run it on the flat rail with your EOTech set up on a 7mm riser. That combination places the magnifier at the correct 1.725-inch centerline height.
| UPC | 810143180879 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | LT755SEO |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.