$33.99
7 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Carbon builds up fast on suppressor mounts, and on a taper mount system that fit matters more than most. Even a thin layer of fouling on the mating surfaces between your suppressor and your muzzle device can throw off alignment, make removal a fight, or mess with the repeatable return to zero that taper mounts are supposed to give you in the first place. The DAT010 exists to solve exactly that problem.
This tool is shaped specifically to match the taper mount geometry used across Dead Air's Xeno and HUB taper mount lineup. Instead of scraping at an angle with a screwdriver or digging around with a dental pick and hoping you don't scratch anything, you get a tool contoured to ride along the taper itself. That means you're breaking loose carbon and copper without gouging the metal or altering the precise tolerances that keep your mount locking up correctly.
A lot of guys reach for whatever is on the bench when carbon starts caking up a mount, but generic tools tend to either miss the fouling in the tight corners or take metal off where it shouldn't come off. Suppressor manufacturers that build taper and adapter systems, Dead Air included, design those mating surfaces to tight tolerances on purpose, since that's what makes the mount repeatable shot after shot. A scraper built to match that geometry gets the job done without compromising the fit you paid for.
It's compact enough to live in a cleaning kit or range bag without taking up real estate, so there's no excuse not to have it on hand after a long session behind a suppressed rifle. A quick scrape every so often, especially if you're running subsonic loads or putting a lot of rounds through in one sitting, keeps your mount interface in good shape and your suppressor coming off (and going back on) the way it should.
It's built to scrape carbon and copper fouling off the mating surfaces of a taper mount suppressor system, like Dead Air's Xeno or HUB taper setups. The contour matches the taper geometry so you can clean the interface without altering the precise fit that makes those mounts repeatable. It saves you from improvising with a pick or screwdriver that could nick the metal.
It's designed around Dead Air's taper mount geometry, so it's going to fit that system best. It may work on other taper style mounts with similar dimensions, but there's no guarantee of a proper match on a different manufacturer's design. If you run a Dead Air taper mount can, this is the tool that's actually shaped for it.
That depends on how much you shoot and what ammo you're running, since subsonic loads and extended range sessions tend to leave more fouling behind. A good habit is to give the mount a quick scrape whenever you notice it's getting harder to seat or remove the suppressor. Catching buildup early keeps the job fast instead of letting it turn into a stubborn scraping session later.
The scraper handles the mechanical removal of caked on carbon and copper, and pairing it with a bit of solvent on a stubborn spot can make the job go quicker. It's not required for basic maintenance, but a drop of your usual gun cleaner won't hurt anything. Just wipe the mount dry afterward before reassembling.
It's shaped to follow the taper contour rather than dig in at random angles, so normal use shouldn't chew up the finish the way an improvised tool might. Like any scraping tool, using excessive force or working at the wrong angle isn't recommended. Light, controlled passes are all it takes to clear fouling without marring the surface.
General cleaning kits usually don't include anything shaped for a taper mount interface, which is a pretty specific job. If you own a Dead Air suppressor with a taper mount, having a tool that fits that geometry beats reaching for a pick or flathead every time. It's a small, inexpensive addition that solves a real fit and maintenance issue.
| UPC | 810128163651 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | DAT010 |
| Shipping Weight | 0.96 |
You must be logged in to post a review.
Reviews
There are no reviews yet.