Description
There is a lot to like about a short, handy 308 that still shoots like a full-size hunting rifle, and that is exactly what Browning built here. The X-Bolt 2 Hunter SPR runs an 18 inch sporter contour barrel in matte blued steel, trimmed down specifically so the rifle stays a manageable length once you spin a suppressor onto the threaded muzzle. Even without a can, the shorter barrel makes this rifle a pleasure to carry through timber, in and out of a truck, or up into a box blind. The barrel is free floated and the action is bedded, which is a big part of why the X-Bolt platform has earned its reputation for out-of-the-box accuracy.
The X-Bolt 2 Upgrades That Matter
Browning did not just slap a new name on the old rifle. The X-Bolt 2 receiver has added bolt guidance surface for a smoother, bind-free throw, and the familiar 60 degree bolt lift keeps your hand clear of the scope while cycling fast. The new DLX trigger is a multi-lever design with a crisp, creep-free break, set around 3.5 pounds from the factory and user adjustable. The steel receiver comes drilled and tapped, and Browning's X-Lock system uses four screws per scope base instead of two for a mounting setup that stays put under recoil. A two-position tang safety and bolt unlock button round out the controls.
Vari-Tech Stock: A Custom Fit Without the Custom Price
The matte black Vari-Tech synthetic stock is the other big story. Length of pull adjusts with internal spacers for a solid, rattle-free feel, the comb raises to line your eye up with your optic, and interchangeable grip modules let you run a classic sporter grip or a more vertical angle depending on your preference. Rubber overmolded gripping surfaces keep things secure in wet or cold conditions, and the thick Inflex recoil pad takes the edge off 308 recoil noticeably.
Why the Hunter SPR 308 Earns a Spot in the Safe
With 4+1 capacity from a flush-fitting detachable magazine and a 1:10 twist that stabilizes modern heavy-for-caliber bullets, this rifle covers deer, hogs, and black bear duty with room to spare. Suppressor users especially will appreciate what Browning put together in this package.
Key Specifications
- Manufacturer: Browning
- Model: X-Bolt 2 Hunter SPR
- Manufacturer Part Number: 036131218
- UPC: 023614870654
- Caliber: .308 Win / 7.62 NATO
- Action: Bolt Action, 60 Degree Bolt Lift
- Capacity: 4+1, Detachable Magazine
- Barrel Length: 18"
- Barrel: Sporter Contour, Free Floated, Threaded Muzzle
- Twist Rate: 1:10"
- Metal Finish: Matte Blued
- Stock: Matte Black Vari-Tech Synthetic, Adjustable LOP and Comb
- Trigger: DLX Adjustable, Factory Set Approx. 3.5 lbs
- Receiver: Steel, Drilled and Tapped, X-Lock Compatible
- Safety: Two-Position Tang
- Hand: Right
What’s Included
- Browning X-Bolt 2 Hunter SPR rifle
- One detachable box magazine
- Interchangeable sporter and vertical grip modules
- Thread protector
- Length of pull and comb adjustment hardware
- Owner's manual
Frequently Asked Questions
What is the muzzle thread pitch on the X-Bolt 2 Hunter SPR?
SPR models from Browning use a 5/8×24 thread pattern, which is the standard for most 30 caliber suppressors and muzzle devices. The muzzle is belled to accommodate the larger threading, and a thread protector keeps everything clean when you are running the bare muzzle.
How adjustable is the Vari-Tech stock on this rifle?
It offers three points of adjustment: length of pull via internal spacers, comb height for proper eye alignment with your scope, and grip angle through swappable grip modules. Browning includes both a sporter-style grip and a vertical grip, so you can set the rifle up however it points best for you. The adjustments lock in solid with no rattle or slop.
Is the Browning X-Bolt 2 Hunter SPR a good suppressor host?
That is really the whole point of the SPR designation. The 18 inch barrel is several inches shorter than a standard 308 hunting barrel, so once a suppressor is attached the overall length stays close to a conventional rifle. You keep the handling of a normal sporter while getting the recoil and noise reduction a can provides.
Can I adjust the trigger pull weight on this X-Bolt 2?
Yes. The DLX trigger is a multi-lever design that ships from the factory set around 3.5 pounds and can be adjusted down to about 3 pounds. It breaks clean with essentially no creep or overtravel, and most hunters find the factory setting works great as-is.



Reviews
There are no reviews yet.