Description
Swift has spent decades perfecting bonded bullet construction, and the Zephyr is their answer to the modern high-BC long-range hunting crowd. This is a 175 grain, .284 diameter 7mm component bullet built for handloaders who want to tune their own rifle to the last thousandth of an inch. Swift tested it hard before release, including extensive hunting in New Zealand at real distances, so this is not a paper-only design.
The Zephyr runs a tangent/secant hybrid ogive, a boat tail base, and a polymer tip, which together help it hold velocity downrange and flatten out trajectory. The bonded lead core and heavy jacket wall are what Swift is known for, and they do the heavy lifting on terminal performance. Weight retention hovers around 88 percent, with controlled expansion and a flat frontal area that drives a straight wound channel from the muzzle out to 1000 yards. The published G1 ballistic coefficient commonly listed is .647, with a sectional density of .310.
What Sets the Zephyr Apart for 7mm Handloaders
Think of this as a bonded bullet that doesn't force you to trade terminal toughness for reach. It fills the same niche as other high-BC bonded hunting bullets, giving you deep penetration and reliable expansion whether the shot breaks up close or way out there. For hunters chasing elk, big mule deer, or anything that asks a bullet to work hard, the bonded core keeps things together when it matters.
Twist Rate and Load Development with the Swift Zephyr
This is a long, heavy-for-caliber bullet, so it wants a fast barrel. Swift calls for a minimum 1:8 twist to stabilize it properly, which lines up perfectly with modern 7mm magnums and cartridges like the 7mm PRC. Since these are components and not loaded ammo, you control seating depth, powder charge, and case prep to dial in accuracy for your specific barrel and chamber. Work up your load carefully with published data matched to the 175 grain weight and you'll have a bullet that shoots flat and hits hard.
Key Specifications
- Manufacturer: Swift Bullet
- Model: Zephyr
- Caliber: 7mm / 28 Caliber
- Bullet Diameter: .284 in
- Bullet Weight: 175 Grain
- Bullet Style: Bonded Boat Tail Spitzer, Polymer Tip
- Ogive: Tangent/Secant Hybrid
- G1 Ballistic Coefficient: .647
- Sectional Density: .310
- Weight Retention: Approximately 88%
- Minimum Twist Rate: 1:8
- Cannelure: No
- Gas Check: No
- Count: 100 per box
- Manufacturer Part Number: 701754
- UPC: 713351701754
What’s Included
- 100 Swift Zephyr 7mm 175 grain bonded polymer tip bullets
Frequently Asked Questions
What twist rate do I need to stabilize the Swift Zephyr 175gr?
Swift recommends a minimum 1:8 twist for the Zephyr. It's a long, heavy-for-caliber bullet, so a faster twist keeps it stable and accurate. This pairs well with modern 7mm magnums and cartridges like the 7mm PRC that typically come with fast barrels.
Is the Swift Zephyr a loaded cartridge or a component bullet?
This is a component bullet for reloading, not loaded ammunition. You'll need properly prepped brass, the right primer, and an appropriate powder charge worked up with published load data for the 175 grain weight. That lets you tune seating depth and the load to your specific rifle.
What kind of game is the Swift Zephyr built for?
The Zephyr is designed as a long-range hunting bullet with a bonded core and heavy jacket for controlled expansion and strong weight retention. It holds roughly 88 percent of its weight and drives a straight wound channel from the muzzle out to around 1000 yards. That makes it a solid pick for elk, large deer, and similar big game at close or extended range.
What is the ballistic coefficient of the 175gr Zephyr?
The commonly published G1 ballistic coefficient for the Zephyr is .647, with a sectional density of .310. The polymer tip and boat tail work together to help it hold velocity and flatten trajectory downrange. Keep in mind your actual numbers can vary slightly based on your barrel and muzzle velocity.





Reviews
There are no reviews yet.