Description
The M-LOK Index Stop is about as stripped down as a hand stop gets, and that is really the whole point. This half-slot piece gives your index finger one fixed spot to find on the handguard every time you grab it, so your support hand ends up in the same place shot after shot instead of creeping toward the muzzle. It is a small, low-bulk way to add a repeatable reference point without committing to a full grip you have to wrap your whole hand around.
What the M-LOK Index Stop Adds to Your Rail
Magpul molded a ridged texture into both the front and rear surfaces, so your finger actually gets some feedback instead of sliding around on smooth polymer. The stop only protrudes about 1/8 inch off the rail, which matches the dimensions of Magpul's Type 2 M-LOK Rail Covers, so it sits flush and clean next to any rail covers you already run. It is also fully ambidextrous, so it works the same whether you are running the rifle right handed or left handed, no flipping parts around.
Check Your Handguard Before Mounting the Index Stop
This part is worth double checking before you order one: the Index Stop is built for octagonal aluminum M-LOK handguards, not round profile aluminum or polymer M-LOK rails. If your handguard has that flat faced, multi sided cross section common on a lot of current aluminum handguards, you are good to go. Since it only takes up half an M-LOK slot, it barely eats into your rail real estate, leaving plenty of room for lights, slings, or whatever else you are running up front.
Built From Magpul's Usual Polymer Playbook
Like the rest of Magpul's M-LOK accessory line, the Index Stop is molded from their proprietary polymer and made in the USA, so it holds up to regular range use without adding meaningful weight to your build. The Flat Dark Earth finish matches up nicely if you are keeping your furniture color coordinated. For anyone running a C-clamp or thumb over bore support hand style, this is a simple, no-fuss way to lock in that hand position without stepping up to a full vertical grip or a bulkier hand stop.
Key Specifications
- Model: Index Stop (MAG1568)
- Manufacturer Part Number: MAG1568-FDE
- UPC: 840815151029
- Manufacturer: Magpul Industries
- Color/Finish: Flat Dark Earth (FDE)
- Material: Magpul proprietary polymer
- Mounting System: M-LOK, half-slot footprint
- Rail Protrusion: 1/8 inch
- Handguard Compatibility: Octagonal aluminum M-LOK handguards only
- Design: Ambidextrous
- Surface Texture: Ridged, front and rear
- Country of Origin: Made in USA
What’s Included
- M-LOK Index Stop (MAG1568-FDE)
- Mounting hardware (T-nut and screw)
Frequently Asked Questions
What does the Magpul Index Stop actually do for my grip?
It gives your index finger a fixed landing spot on the handguard, so your support hand ends up in the same position every time you grip the rifle. That consistency helps you avoid letting your hand drift too far forward toward the muzzle, especially during rapid fire or longer range sessions. It is meant to be a subtle reference point rather than a full grip you wrap your hand around.
Will the M-LOK Index Stop fit my handguard?
It is designed specifically for octagonal aluminum M-LOK handguards, the flat-faced, multi-sided profile found on a lot of newer aluminum rails. It is not built for round profile aluminum handguards or polymer M-LOK forends, so it is worth checking your handguard's cross section before ordering. If you are unsure, look at the handguard's shape from the front to confirm it has that octagonal, flat-sided face.
Is the Index Stop the same for right and left handed shooters?
Yes, it is built as an ambidextrous piece, so it functions the same way regardless of which side you shoot from. There is no need to flip it or install it differently for left handed shooters. It just clamps onto the M-LOK slot and works the same either way.
Does the Index Stop come with what I need to mount it?
It ships with the hardware needed to attach it directly to an M-LOK slot, so you are not left hunting for extra screws or T-nuts. Installation is straightforward with a small hex or Allen wrench, following the standard M-LOK mounting process. No adapters or additional parts are required as long as your handguard is the compatible octagonal aluminum style.





Reviews
There are no reviews yet.