$33.99
14 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
When a brush actually fits your bore, cleaning gets a whole lot easier. These Sinclair bronze brushes are built intentionally larger than bore diameter, so the bristles make solid contact with the rifling instead of skating past the grooves the way undersized brushes tend to do. That firm fit is the difference between a patch that comes out streaked and one that comes out clean. Sized for .270, .277, and 7mm rifle bores, the pack covers a huge slice of the deer and long-range crowd, from a classic .270 Winchester to a 7mm Rem Mag or 7mm PRC.
The bristles are phosphor bronze with a heavy fill, meaning more bristle contact per stroke and a longer working life than the thin generic brushes you'll find bundled in cheap kits. Bronze is softer than your barrel steel, so it scrubs out hard carbon and copper fouling that patches alone leave behind without touching the rifling. Each brush stem is cold welded to a looped-and-wound brass core that's rated to hold up under serious pull force, so you're not going to twist the bristles off the core halfway down the barrel.
Every brush uses the universal 8-32 male thread, so it spins right onto standard cleaning rods and most pull-through cable systems. The starter thread is machined clean so it catches easily instead of cross-threading. The caliber is stamped on the stem too, which is a small touch that saves you from squinting at a pile of brushes trying to figure out which one is which. A quick tip from the bench: skip the bronze brush when you're running an aggressive copper-cutting solvent, since those chemicals eat bronze. Save these for carbon and general fouling and they'll last.
Bore brushes are a wear item. Once the bristles feel loose in the barrel, they've lost their bite and it's time for a fresh one. Buying a dozen at a time means you always have a new brush on the shelf and never talk yourself into scrubbing with a worn-out one just because it's the last one in the drawer.
It's sized for .270, .277, and 7mm rifle bores, which covers a wide range of popular rounds. That includes cartridges like the .270 Winchester, .270 WSM, 7mm-08, 7mm Rem Mag, and 7mm PRC. The caliber is stamped right on the stem so you can confirm you've grabbed the correct brush.
Yes, they use the standard 8-32 male thread found on the vast majority of rifle cleaning rods and most pull-through cable systems. The starter thread is machined clean so it catches easily without cross-threading. If your rod is 8-32, you're set.
Bronze is softer than barrel steel, so it won't harm the rifling and does a far better job scrubbing hard carbon and copper fouling out of the grooves than nylon can. The one thing to watch is aggressive copper-cutting solvents, which dissolve bronze, so use nylon with those and save the bronze for carbon and routine fouling.
Bore brushes are a consumable that wears out over time, and once the bristles feel loose in the bore they've lost their scrubbing power. Buying a dozen means you always have a fresh brush ready and won't be tempted to keep using a worn one. For anyone who shoots and cleans regularly, it's the more practical way to buy them.
| UPC | 608060400411 |
|---|---|
| Manufacturer | |
| Caliber/Gauge | .270/6.8 mm (.277) |
| Quantity | 12 |
You must be logged in to post a review.
Reviews
There are no reviews yet.