$53.99
13 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Winchester has been turning out rifle brass for a long time, and this 300 Winchester Magnum brass carries the same reputation reloaders have leaned on for decades. Each case comes new and unprimed, manufactured to tight tolerances so you get smooth feeding and positive chambering once your loads are assembled. If you shoot a 300 Win Mag and you'd rather build your own rounds than buy factory, this gives you a solid, repeatable starting point.
The big draw here is consistency. Winchester holds case-to-case weight and internal capacity to tight specs, which matters a lot when you're chasing accuracy with a magnum cartridge. Uniform brass means powder charges behave the same way shot to shot, and that translates to tighter groups downrange. The brass is also built tough enough to be reloaded several times, so you get real mileage out of each case before it's done.
Since this is bulk rifle brass, it's smart to run it through your normal prep routine before loading. Plan on sizing, trimming to length, then deburring and chamfering the case mouths. You may spot a few mouths that look slightly out of round or see some annealing color near the shoulder, which comes from the final wash step after annealing and tumbles right out. Give everything a once-over, size and trim, and you're ready to build loads.
The 300 Winchester Magnum is a belted, bottlenecked .30-caliber magnum introduced back in 1963, and it's still the most popular .30-cal magnum with American hunters for good reason. It's flexible enough to run lighter 150-grain bullets for flatter trajectories or heavier 200-plus grain projectiles for big game like elk, moose, and sheep. Starting with quality brass is the first step toward a load that shoots the way you want it to. Note this is a reloading component only and not loaded ammunition.
This is brand new, unprimed brass straight from the factory. It has never been fired or loaded, so you're starting with fresh cases. That gives you full control over your load development from the ground up.
Yes, with bulk rifle brass it's best to size, trim to length, then deburr and chamfer the case mouths before loading. You might notice a few mouths slightly out of round or some annealing color near the shoulder, both of which are normal and clean up during prep. A quick pass through your usual routine gets everything uniform and ready.
The .300 Win Mag uses a large rifle primer. Since these cases ship unprimed, you'll add primers as part of your reloading process. That lets you pair the brass with whatever primer your load calls for.
Winchester brass is durable and can be reloaded several times when you keep your loads within sensible pressures and take care of the cases. Proper sizing, trimming, and annealing as needed will stretch case life. With good habits, you'll get plenty of firings out of each one.
| UPC | 020892632066 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | WSC300WMU |
| Caliber/Gauge | .300 Winchester Magnum |
| Product Type | Rifle |
| Quantity | 50 Per Bag |
| Style | Large |
You must be logged in to post a review.
Reviews
There are no reviews yet.