0
0

RCBS .356 Steel Neck Bushing (81671) for Gold Medal Match Dies

UPC: 076683816719

$16.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck tension is one of those details that separates good handloads from great ones, and this .356 steel neck bushing from RCBS puts that control right in your hands. Instead of relying on a one-size expander, you slip this bushing into your RCBS Gold Medal Match sizing die and size the neck to the exact diameter you want. The result is consistent, repeatable grip on your bullet, round after round.

How the RCBS .356 Steel Neck Bushing Earns Its Keep

This bushing is self-centering, so it aligns itself with the case neck as it sizes. That means even, concentric tension rather than the pull-to-one-side you can get from a fixed expander ball. Because you are only sizing the neck down to where it needs to be, you reduce the amount of work hardening the brass goes through. Less working of the brass means longer case life and brass that behaves the same from firing to firing, which is exactly what you want when you are chasing tight groups.

Picking the Right Size Around .356

The .356 figure is the inside sizing diameter of the bushing, not a caliber. To find your number, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch, which leaves roughly .001 inch of spring-back for correct tension. You can also take your neck wall thickness, double it, add your bullet diameter, then subtract .001 inch. RCBS suggests keeping a bushing or two on either side of your target so you can fine-tune as you go.

Getting the Most From This RCBS Neck Bushing

These bushings shine when paired with quality brass that has consistent neck wall thickness, and neck turning takes it even further. They ship bare, in-the-white steel, so a touch of case lube keeps sizing smooth and easy. Drop one into your Gold Medal Match die and you have a simple, affordable way to take real command of your neck tension.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 81671
  • UPC: 076683816719
  • Sizing Diameter: .356 in
  • Material: Steel (in-the-white / bare)
  • Design: Self-centering, interchangeable
  • Compatibility: RCBS Gold Medal Match series sizing dies
  • Fits Die Styles: Full-length and neck sizing
  • Quantity: 1 bushing
  • Country of Origin: USA

What’s Included

  • One RCBS .356 steel neck bushing (MPN 81671)

Frequently Asked Questions

What dies does the RCBS .356 steel neck bushing work with?

It is designed for RCBS Gold Medal Match series sizing dies and works in both full-length and neck sizing styles. Redding, Wilson, and Hornady bushings also fit RCBS Gold Medal bushing dies, so the compatibility runs both ways. It will not work in standard sizing dies that are not set up for bushings.

What does the .356 measurement refer to?

The .356 is the inside sizing diameter of the bushing, not a cartridge caliber. It determines how far down the neck gets sized, which sets your bullet tension. To pick the right size, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch.

Why use a neck bushing instead of a standard expander ball?

A bushing lets you set the exact amount of neck tension rather than accepting a fixed amount. The self-centering design keeps things concentric, and sizing the neck only as much as needed reduces work hardening. That translates to longer brass life and more consistent, accurate ammo.

Does this RCBS neck bushing need case lube?

Yes. It ships as bare, in-the-white steel, so traditional case lubrication is recommended to keep sizing smooth. A light coat of lube on the neck helps the brass glide through cleanly.

Additional information

UPC

076683816719

Manufacturer

Manufacturer Part Number

81671

Reviews

There are no reviews yet.

Be the first to review “RCBS .356 Steel Neck Bushing (81671) for Gold Medal Match Dies”