Description
The RCBS Seater Die for 6.5 Creedmoor is the business end of your reloading bench. It takes your sized and charged case, seats the bullet to the depth you dial in, and does it with the kind of consistency that shows up on paper. This is a Group D die covering bottleneck rifle cartridges, and it's the single seater component from the RCBS lineup rather than a full die set, so it's the piece to grab if you already have your sizing die squared away or want to run a dedicated seating setup.
What the RCBS 6.5 Creedmoor Seater Die Does on the Press
Seating depth is adjusted by screwing the seating stem in and out of the die body, which lets you fine-tune where that bullet sits against the lands and keep your overall length right where your load data wants it. Once you've got the stem set, every pull of the handle drops the bullet to the same depth, which is a big part of chasing tight groups in a cartridge like the 6.5 Creedmoor.
Understanding the Roll Crimp on This Group D Seater Die
Like other RCBS seater dies, this one has a built-in roll crimp. A roll crimp rolls the edge of the case mouth into the bullet's cannelure to lock it in place, which is handy for hunting loads or anything that sees rough feeding. The key thing to know is that a roll crimp only belongs on bullets that have a cannelure groove. Running one on a smooth target bullet just deforms the case mouth and works against accuracy. If you're loading match bullets without a cannelure, you simply back the die off so the crimp ring no longer touches the case mouth, and the die seats with no crimp at all.
Build and Fit of the RCBS Seater Die
The die is machined from steel, made in the USA, and backed by the RCBS reputation for tools that outlast the rest of your gear. It threads into any standard 7/8-14 single-stage or progressive press, so it drops right into the setup you're already running. Pair it with the matching sizing die and a shell holder and you've got your 6.5 Creedmoor loading covered from brass prep through the finished round.
Key Specifications
- Manufacturer: RCBS
- Caliber: 6.5mm Creedmoor
- Die Type: Bullet Seater Die
- Die Group: Group D (Bottleneck Rifle Cartridges)
- Crimp Type: Roll Crimp (adjustable, can be set to no crimp)
- Projectile Caliber: .264 Caliber
- Material: Steel
- Thread Size: 7/8-14
- Quantity: 1 Die
- Country of Origin: USA
- Manufacturer Part Number: 32938
- UPC: 076683329387
What’s Included
- RCBS 6.5 Creedmoor Seater Die (Group D) with seating stem
Frequently Asked Questions
Is this RCBS 6.5 Creedmoor seater die a full die set or just the seater?
This is the single seater die only, not a complete set. It does not include a sizing die or shell holder. It's a great pick if you already have your sizing die or want a dedicated seating station on your press.
Does the RCBS Group D seater die crimp my bullets?
It has a built-in roll crimp, but you choose whether to use it. For bullets with a cannelure, you can seat and roll crimp in one stroke. For smooth match bullets without a cannelure, back the die off so the crimp ring no longer touches the case mouth and it seats with no crimp.
How do I set bullet seating depth with this die?
Depth is adjusted by screwing the seating stem in and out of the die body. Once you dial it in to your desired overall length, every round seats to that same depth for consistent results.
Will this RCBS seater die fit my press?
Yes, it uses the standard 7/8-14 thread, so it threads into any common single-stage or progressive reloading press. It's a straightforward drop-in for the setup you're already running.





Reviews
There are no reviews yet.