Description
If you shoot a dedicated bolt-action 30-06 and want to squeeze more life out of your brass while chasing better accuracy, this RCBS Neck Die Set is the tool for the job. Rather than working the whole case back down, the neck sizer only touches the neck of the case, leaving the shoulder and body exactly where your chamber formed them. Less brass movement means less work-hardening, fewer trimmings, and ammo that chambers smooth in the rifle it was fired in.
What's in the RCBS 30-06 Neck Die Set
This is a two-die set. You get a Neck Sizer Die with an Expander-Decapping Unit that resizes the neck just enough to hold a bullet snugly while knocking out the spent primer in the same stroke. The second die is a Seater Die with a bullet seater plug and a built-in roll crimp, so you can seat and secure your bullet in one pass. Both dies use the standard 7/8-14 thread, so they'll thread right into any common single-stage or turret press.
How the RCBS Neck Die Set earns its keep
Neck sizing is a precision reloader's trick. Because the case stays fire-formed to your chamber, headspace stays consistent and the brass doesn't get stretched and resized over and over. Reloaders who run this die set regularly point to longer case life and improved consistency on target, which is exactly what you want out of a hunting or target 30-06. Keep in mind neck-sized brass is meant to go back into the same rifle it came out of, and new or once-fired brass from another gun should be full-length sized first before you switch to neck sizing.
A few things to keep in mind
The shell holder is sold separately on this one, and the 30-06 uses RCBS shell holder #3. These dies are made in the USA and hand-inspected before they ship, which is a big part of why RCBS has the reputation it does on the reloading bench.
Key Specifications
- Manufacturer: RCBS
- Caliber: 30-06 Springfield
- Die Type: Neck Sizing Two-Die Set
- Manufacturer Part Number: 14802
- UPC: 076683148025
- Group: Group A – Popular Rifle Cartridges
- Thread: 7/8-14 Standard
- Rifle Type: Bolt-Action
- Shell Holder: #3 (sold separately)
- Country of Origin: Made in USA
- Shipping Weight: 1.3 lbs
What’s Included
- Neck Sizer Die with Expander-Decapping Unit
- Seater Die with bullet seater plug and built-in roll crimp
Frequently Asked Questions
What's the difference between this RCBS neck die set and a full-length die set?
A full-length die sizes the entire case back down toward SAAMI minimum dimensions, while this neck die set only resizes the neck. By leaving the shoulder and body at their fire-formed dimensions, you work the brass less, which extends case life and can tighten up your groups. Neck sizing is best suited for brass that stays with one bolt-action rifle.
Does the RCBS 30-06 Neck Die Set come with a shell holder?
No, the shell holder is sold separately. For 30-06 Springfield you'll want RCBS shell holder #3. It's worth grabbing one alongside the dies if you don't already have it on the bench.
Can I use neck-sized brass in any 30-06 rifle?
Neck-sized brass is intended to go back into the same rifle it was fired in, since the case stays formed to that specific chamber. If you want to use it in a different rifle or you're starting with new brass, full-length size it first. This set is designed for bolt-action rifles.
Will these RCBS dies fit my press?
Yes, they use the standard 7/8-14 thread found on common single-stage and turret presses, so they'll thread right in. RCBS dies are made in the USA and hand-inspected before they leave the factory.





Reviews
There are no reviews yet.