0
0

RPM CLR-30125 Precision 30mm High 1.25″ Co-Linear Bubble Scope Rings

UPC: 850063702027

$174.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Mounting a scope straight is one of those jobs that looks easy until you're hunched over the bench juggling two tiny levels that never seem to agree. The RPM CLR-30125 solves that headache by building the level right into the ring set. This is a 30mm ring pair in the high 1.25" configuration, meaning the center of your scope tube sits 1.25 inches above the base. That extra height is handy for larger objective bells, generous cheek risers, or clearing a chunky bolt handle.

What Sets the CLR-30125 Co-Linear Level Apart

The clever part here is where RPM put the bubble. Instead of perching it on the top cap like a lot of rings, the level lives in the bottom half of the ring so it reads co-linear to your rifle once it's clamped down. During setup, you level the rifle, level the scope, and torque the caps to spec with everything agreeing in real time. Out on the gun, the bubble is positioned so you can glance at it with your non-dominant eye without lifting your head off the stock. Catching even a small amount of cant matters a lot the farther you stretch things out, which is exactly why this feature earns its keep for long range work.

Build Quality on the RPM 30mm High Rings

The ring body and cap are machined from 6061-T6 aluminum, with a 303 stainless steel cross bolt and nut in a 1/2" size for the clamp. There's an alignment lug between the cap and base that keeps everything indexed correctly while you run the cap screws down. These rings clamp to a Picatinny rail, and folks who run them tend to point out the clean machining and solid lockup once they're torqued. Recommended torque is 18 in-lbs on the cap screws and 45 in-lbs on the cross bolt.

RPM is proud to make these in the USA, and the attention shows in the fit and finish. If you're dialing in a precision rig or a hunting setup where a level mount is worth the effort, this set gets your optic squared away and keeps it there.

Key Specifications

  • Tube Diameter: 30mm
  • Ring Height: High (1.25")
  • Quantity: Set of 2 (pair)
  • Integrated Level: Co-linear bubble level built into lower ring half
  • Ring Material: 6061-T6 aluminum body and cap
  • Cross Bolt: 303 stainless steel, 1/2"
  • Base Compatibility: Picatinny rail
  • Alignment: Integrated cap/base alignment lug
  • Cap Screw Torque: 18 in-lbs
  • Cross Bolt Torque: 45 in-lbs
  • Finish: Black
  • Made In: USA
  • Manufacturer: Ruff's Precision (RPM)
  • MPN: CLR-30125
  • UPC: 850063702027

What’s Included

  • Two 30mm high (1.25") scope rings with integrated co-linear bubble level
  • Cross bolts and hardware
  • Cap screws

Frequently Asked Questions

What does the co-linear bubble level on the CLR-30125 do?

The level is built into the bottom half of the ring so it reads true to your rifle once the rings are clamped down. It helps you mount the scope dead level without juggling separate bubble levels, and it's positioned so you can check it with your non-dominant eye from behind the scope. Keeping cant out of your setup pays off the farther you shoot.

Will these RPM 30mm rings fit my rail?

The CLR-30125 is built to clamp onto a Picatinny rail using the 1/2" 303 stainless cross bolt. They are not designed for Weaver-style bases, so make sure your rifle is running a Picatinny rail before ordering. If you're unsure what rail your gun has, measuring the slot spacing is the quickest way to confirm.

How high do the 1.25" rings sit?

This is the high configuration, which puts the center of your 30mm scope tube 1.25 inches above the base. That height is useful for scopes with larger objective bells, taller cheek risers, or when you need extra clearance over the barrel or bolt handle. RPM also offers medium and low heights in this line if you need to sit the optic lower.

What are the recommended torque specs for the CLR-30125?

RPM lists 18 in-lbs for the cap screws and 45 in-lbs for the cross bolt. Using a quality torque wrench and sticking to those numbers gives you a secure, repeatable hold without overstressing the scope tube. The specs are printed right on the box so you don't have to hunt for a tiny instruction sheet.

Additional information

UPC

850063702027

Manufacturer

Manufacturer Part Number

CLR-30125

Shipping Weight

0.501

Reviews

There are no reviews yet.

Be the first to review “RPM CLR-30125 Precision 30mm High 1.25″ Co-Linear Bubble Scope Rings”