Description
This is the Forster .286" neck bushing, part number BUSH-286, the drop-in insert that lets you fine-tune neck tension on your reloaded brass. Instead of relying on a fixed expander or the chamber of your rifle to set the neck, the bushing works off the wall thickness of the brass you're running. That means you're the one deciding how far down the neck gets sized, which translates to more consistent bullet seating and better repeatability on the target.
How the .286 Neck Bushing Fits Your Loading Bench
This bushing is built to run inside Forster's Bushing Bump Neck Sizing Dies and Bushing Full Length Sizing Dies. It does not work with Redding or L.E. Wilson bushings, so keep it paired with the Forster system it was made for. Forster offers bushings in .001 inch increments across a wide range of diameters, so once you figure out your ideal size you can step up or down a thousandth to chase the exact neck tension your load likes.
Picking the Right Bushing Size
The usual starting point is to measure the neck of a loaded round and subtract about .002 inch. So if your loaded neck mics out around .288, this .286 bushing lands right in the sweet spot. A lot of reloaders keep two or three sizes on hand so they can tune tension as brass work-hardens or as they switch between different brands of cases with varying neck wall thickness.
Built for Smooth, Repeatable Sizing
Forster runs these bushings through a cryogenic process that refines and tightens the surface of the steel, then hones each one to the stated inside diameter. The result is a slick interior finish that sizes necks cleanly without dragging or marking the brass. Less drag means less runout, and less runout means straighter ammo coming off your press. For anyone chasing tight groups in a bolt gun, controlling neck tension at this level is one of the easiest ways to shrink your extreme spread and tighten things up.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BUSH-286
- UPC: 757253998447
- Inside Diameter: 0.286 in
- Material: Cryogenically treated steel
- Sizing Increment Availability: 0.001 in steps across range
- Compatibility: Forster Bushing Bump Neck & Bushing Full Length Sizing Dies
- Quantity: 1 bushing
- Country of Origin: USA
What’s Included
- One Forster .286" neck bushing (BUSH-286)
Frequently Asked Questions
What dies does the Forster .286 neck bushing work with?
This bushing is designed for Forster's Bushing Bump Neck Sizing Dies and Bushing Full Length Sizing Dies. It is not compatible with Redding or L.E. Wilson bushing dies, so stick with the Forster system it was built for.
How do I know if .286 is the right bushing size for my brass?
Measure the neck diameter of a loaded round and subtract roughly .002 inch to find your starting point. If your loaded neck measures around .288, the .286 bushing should land you in a good spot. Since brass neck wall thickness varies by brand, many reloaders keep a couple of sizes on hand to fine-tune tension.
Why use a neck bushing instead of a standard expander ball?
A bushing lets you control exactly how much the neck is sized down based on your brass, rather than relying on a fixed expander. This prevents overworking the neck, extends case life, and gives you consistent bullet tension, which helps tighten your groups and reduce runout.
Is the .286 bushing sold individually or in a set?
This listing is for a single .286-inch bushing. Forster also offers kits that include three bushings per cartridge if you want a range of sizes right out of the gate, but this one is a standalone insert you can add to your collection as needed.





Reviews
There are no reviews yet.