Description
The Nosler RDF 6.5mm 150gr Hollow Point Boat Tail is a dedicated long-range match bullet built around one goal: getting the flattest trajectory and least wind drift possible. The RDF line (short for Reduced Drag Factor) was designed from the ground up to deliver exceptionally high ballistic coefficients, and this 150-grain .264 projectile carries a G1 BC of 0.670 and a G7 of 0.342. Pair that with a sectional density of .327 and you've got a bullet that holds velocity downrange and stays honest in a crosswind.
What Makes the RDF 6.5mm Bullet Different
Two design features do the heavy lifting here. The compound ogive blends a sharp secant nose into a more forgiving tangent section where the bullet meets the rifling, which makes it less fussy about seating depth and easier to tune. The long, drag-reducing boat tail cleans up airflow off the base and sharpens the overall form. Together they give you a sleek profile without a lot of fiddling at the bench.
No Meplat Trimming on the Nosler RDF
One of the best things about these bullets is what you don't have to do. The RDF carries the smallest, most consistent meplat of any hollow point match bullet line Nosler makes, which means no pointing and no trimming tips to chase uniformity. That's a real time-saver if you've spent evenings prepping bullets before a match. Straight out of the box they're ready to seat.
Loading the 6.5mm 150gr RDF
With a 1.505-inch overall length and no cannelure, this bullet suits serious 6.5mm handloaders running cartridges like the 6.5 Creedmoor, 6.5 PRC, and 26 Nosler in fast-twist barrels that stabilize the heavier 150-grain weight. These are component bullets for reloading, not loaded ammunition, so you'll be supplying your own brass, powder, and primers. For precision rifle competition, long-range steel, or just wringing the most out of a 6.5 bore, the RDF is one of the better-performing match projectiles you can seat.
Key Specifications
- Manufacturer: Nosler
- Manufacturer Part Number: 49826
- UPC: 054041498265
- Model: RDF
- Caliber: 6.5mm
- Bullet Diameter: .264"
- Bullet Weight: 150 gr
- Bullet Type: Hollow Point Boat Tail
- Ballistic Coefficient (G1): 0.670
- Ballistic Coefficient (G7): 0.342
- Sectional Density: .327
- Overall Length: 1.505"
- Cannelure: No
- Quantity: 100 Per Box
- Country of Manufacture: United States
What’s Included
- 100 Nosler RDF 6.5mm 150gr Hollow Point Boat Tail bullets
Frequently Asked Questions
Are the Nosler RDF 6.5mm bullets loaded ammunition or component bullets?
These are component bullets for handloading, not loaded ammo. You'll need to supply your own brass, powder, and primers to build a finished cartridge. The box contains 100 projectiles only.
What's the ballistic coefficient on the RDF 6.5mm 150gr?
This 150-grain bullet carries a G1 BC of 0.670 and a G7 BC of 0.342. Those high numbers are the whole point of the RDF design, giving you a flatter trajectory and less wind drift at distance. It's one of the higher-BC match bullets available in the 6.5mm class.
Do I need to trim or point the meplat on these RDF bullets?
No. Nosler built the RDF with the smallest, most consistent meplat of any of their hollow point match bullet lines, so there's no pointing or tip trimming required. They're ready to seat right out of the box, which saves a good bit of prep time at the bench.
What twist rate do I need to stabilize the 150gr RDF?
Because this is a long, heavy-for-caliber 6.5mm bullet, you'll want a fast-twist barrel to stabilize it properly. A 1:8 twist or faster is the common recommendation for 150-grain 6.5mm projectiles, though it's always smart to confirm against your specific rifle and velocity. Many modern 6.5 Creedmoor and 6.5 PRC barrels handle it well.




Reviews
There are no reviews yet.