0
0

Hornady Cam-Lock Bullet Collet #10 .375″ for Cam-Lock Puller

UPC: 090255921632

$13.99

10 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run the Hornady Cam-Lock Bullet Puller, this is the exact collet you need to handle .375 caliber bullets. The #10 is a diameter-specific insert that clamps around the projectile so it can be drawn out of the case cleanly when you cycle your press handle. It's the part of the system that does the actual gripping, and matching the right collet to your bullet diameter is what makes the whole setup work right.

What the #10 .375 Collet Handles

This one is sized for .375 diameter rifle bullets, so it covers popular big-bore rounds like the .375 H&H Magnum, .375 Ruger, and .376 Steyr, among others. Hornady designates these collets by caliber rather than by a specific bullet style, so it works across different .375 projectile shapes as long as the diameter matches. Keep in mind the Cam-Lock system is intended for rifle cartridges only.

Why Reloaders Reach for the Cam-Lock Collet

The big draw here is speed and a clean pull. Instead of banging away with a kinetic hammer, you raise the cartridge into the puller, clamp the collet down on the bullet, and lower the press arm to slip it free. Reloaders who use the system regularly point out that it leaves little to no mark on the projectile, which means you can salvage good bullets and powder when you need to break down a load that didn't shoot the way you wanted. It's a favorite move for dialing in a new load, correcting a mistake, or pulling down surplus ammo to rework it.

Pairing It With Your Setup

This collet is designed to work with the Hornady Cam-Lock Bullet Puller (item 050095), which is sold separately. It threads into a standard press, works best on a single stage, and swaps out quickly when you move between calibers. If you reload more than one bullet diameter, it's smart to keep a few collets on hand so you're never stuck mid-session. Pull slow and steady and you'll keep the powder in the case where it belongs.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 392163
  • Model: Cam-Lock Bullet Collet #10
  • UPC: 090255921632
  • Bullet Diameter: .375"
  • Caliber: .375 Caliber
  • Type: Diameter-Specific Bullet Puller Collet
  • Cartridge Type: Rifle
  • Fits: Hornady Cam-Lock Bullet Puller (Item 050095)
  • Quantity: 1 collet

What’s Included

  • One (1) Hornady Cam-Lock Bullet Collet #10 (.375" diameter)

Frequently Asked Questions

What bullet diameter does the #10 collet fit?

The #10 collet is sized for .375 caliber bullets with a .375 inch diameter. That covers common big-bore rifle rounds such as the .375 H&H Magnum, .375 Ruger, and .376 Steyr. Hornady labels its collets by caliber, so it works with various .375 bullet shapes as long as the diameter matches.

Do I need the Cam-Lock Bullet Puller to use this collet?

Yes. This collet is the gripping insert and does not work on its own. It's made to thread into the Hornady Cam-Lock Bullet Puller (item 050095), which is sold separately and mounts in your reloading press.

Will the Cam-Lock collet damage my bullets when I pull them?

When set up correctly, the Cam-Lock system pulls bullets with little to no marking, so most projectiles come out clean enough to reuse. The key is making sure the collet grips only the bullet and that you pull slow and steady. Pulling gently also helps keep the powder from flying out of the case.

Can I use this collet to pull pistol bullets?

No. The Hornady Cam-Lock system, including this collet, is intended for rifle cartridges only. For handgun ammunition, you'll want to look at a different pulling method rather than the Cam-Lock setup.

Additional information

UPC

090255921632

Manufacturer

Manufacturer Part Number

392163

Caliber/Gauge

.375 Caliber

Shipping Weight

0.0375

Reviews

There are no reviews yet.

Be the first to review “Hornady Cam-Lock Bullet Collet #10 .375″ for Cam-Lock Puller”