Description
This is the factory conversion die set that turns your existing MEC 600 Jr. Mark V single-stage press into a 12 gauge reloading machine. Instead of buying a whole second press when you want to load a different gauge, you pull the old dies and drop these in. For anyone running a 600 Jr. Mark V in another gauge already, it's the smart way to add 12 gauge to your bench without doubling your footprint or your spending.
MEC built the 600 Jr. Mark V to handle shells up to 3 inches, and this die set keeps all of that intact once installed. You're getting a genuinely complete kit here, not just a couple of parts you have to piece together with aftermarket odds and ends.
What Comes in the MEC 600 Jr. Mark V 12 Gauge Die Set
The set includes the K.O. bushing, resize ring, deprime punch, reprime punch, wad guide, rammer tube, star crimp head, cam crimp assembly, shell holder, and drop tube. That covers every station in the loading cycle, from knocking out the old primer to laying down a clean star crimp on the finished shell. MEC also packs in full installation instructions, which matters because the swap is something you do yourself at the bench.
Getting the 12 Gauge Die Set Running
The changeover is straightforward for anyone who already knows their way around a 600 Jr. Mark V. Folks who've done it report having the new dies installed in about twenty minutes and shells rolling off the press shortly after. If you're loading trap, skeet, sporting clays, or field loads, this is the gauge most reloaders start with, and the 600 Jr. Mark V is a well-proven workhorse for it.
MEC has been building shotshell presses for decades, and their gear earns a reputation across all experience levels, from first-time loaders to guys who've been at the bench since before most of us picked up a shotgun. This die set carries that same reliability over to whatever gauge you're converting to.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number: 100845212
- Model: 600 Jr. Mark V
- Series: Mark V Die Set
- UPC: 098489016728
- Gauge: 12 Gauge
- Product Type: Shotshell Die Set
- Press Compatibility: MEC 600 Jr. Mark V
- Press Type: Single Stage
- Shell Length Capacity: Up to 3 inch
- Crimp Type: Star Crimp
- Country of Origin: United States
- Weight: Approx. 1.2 lbs
What’s Included
- K.O. Bushing
- Resize Ring
- Deprime Punch
- Reprime Punch
- Wad Guide
- Rammer Tube
- Star Crimp Head
- Cam Crimp Assembly
- Shell Holder
- Drop Tube
- Installation Instructions
Frequently Asked Questions
What press does the MEC 600 Jr. Mark V 12 gauge die set fit?
This set is made to convert an existing MEC 600 Jr. Mark V single-stage press over to 12 gauge. It's a conversion kit, not a standalone press, so you'll need the 600 Jr. Mark V already on your bench. It will not fit other MEC models like the Sizemaster or 9000 series.
Is everything included to do the conversion, or do I need extra parts?
Everything needed for the changeover comes in the box. That includes the K.O. bushing, resize ring, deprime and reprime punches, wad guide, rammer tube, star crimp head, cam crimp assembly, shell holder, and drop tube, plus full installation instructions. You won't need to source aftermarket pieces to get up and running.
How long does it take to install the 600 Jr. Mark V 12 gauge die set?
Most reloaders who are already familiar with the 600 Jr. Mark V report having the new dies swapped in and running in around twenty minutes. The included instructions walk you through each step. Once it's dialed in, you can start loading finished shells right away.
What shell lengths will the 600 Jr. Mark V handle with this 12 gauge die set?
The MEC 600 Jr. Mark V is adjustable to load shells up to 3 inches, and this die set keeps that capability once installed. That covers the range most 12 gauge trap, skeet, sporting, and field loads fall into. Always follow published load data for the specific hull and components you're using.





Reviews
There are no reviews yet.