Description
Every reloader eventually ends up with a round that needs taken apart, whether it's a seating depth that drifted off, the wrong powder charge, or a bullet you'd rather save for another load. This Forster #264 collet is the caliber-specific piece that lets your Forster Collet-Style Bullet Puller grab onto .264 diameter bullets, which covers the whole 6.5mm family. It drops into the puller body, and a quick turn with a wrench clamps the jaws down on the bullet so your press does the pulling.
How the #264 Collet Fits Into the System
This is an add-on component, not a standalone tool. It's built to work with the Forster Standard Bullet Puller and the Forster Universal Bullet Puller, both of which thread into any conventional 7/8"-14 reloading press. The beauty of the collet-style setup is that the downward pull of the press tightens the grip on the bullet instead of letting it slip, so you get a clean, controlled extraction every time. When you want to pull a different caliber, you just swap in the matching collet rather than buying a whole new tool.
Why the Solid Steel Build Matters
Forster machines these collets from solid steel, then heat treats and hand polishes them for smooth operation. That polish does more than look nice. It helps the jaws release bullets without chewing up the jacket, which is why so many reloaders find they can pull a round and reseat the same bullet with barely a mark on it. Compared to a hammer-style inertia puller, this method keeps your powder contained and is a good deal quieter and faster on the bench.
Getting Clean Pulls With the #264 Collet
For the best bite, make sure there's enough bullet exposed above the case mouth for the jaws to grab. Deeply seated bullets give the collet less bearing surface to work with. One thing worth noting up front: this collet is designed for jacketed bullets and is not intended for use on lead bullets.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: BP2264
- Model: Collet #264
- UPC: 757253002991
- Caliber/Bullet Diameter: .264 / 6.5mm
- Material: Solid steel, heat treated
- Finish: Hand polished
- Compatibility: Forster Standard and Universal Bullet Pullers
- Press Thread: 7/8"-14
- Quantity: 1 collet
- Weight: Approx. 0.043 lbs
What’s Included
- One (1) Forster #264 bullet puller collet (.264/6.5mm)
Frequently Asked Questions
Does the Forster #264 collet work on its own?
No, the collet is a required accessory, not a complete tool. It fits inside the Forster Standard Bullet Puller or the Forster Universal Bullet Puller, which then threads into your reloading press. You'll need one of those puller bodies for the collet to do its job.
What calibers does the #264 collet cover?
This collet is sized for .264 inch bullet diameter, which is the 6.5mm family. That covers popular rounds like 6.5 Creedmoor, 6.5 PRC, 6.5×55 Swede, 264 Winchester Magnum, 6.5 Grendel and others using 6.5mm bullets. Order your collets by bullet diameter rather than cartridge name.
Will it damage my bullets when I pull them?
For jacketed bullets, the hand-polished steel jaws are designed to grip and release without chewing up the bullet, so most pulled bullets come out with little to no marking and can be reseated. The key is leaving enough bullet exposed above the case mouth for the collet to grab. This collet is not intended for use on lead bullets.
Does this fit the Forster Co-Ax press?
The collet itself works with the Forster Standard and Universal Bullet Pullers. The Universal Bullet Puller is the one designed to work with the Co-Ax press as well as any standard 7/8"-14 press, while the original Standard Bullet Puller is meant for conventional presses. Match the collet to whichever puller body you're running.




Reviews
There are no reviews yet.