Description
The Swampfox Hostile Engagement Mount takes the idea of running an LPVO and an offset dot and bakes it into one solid chunk of aluminum. It holds a 34mm scope tube at a 1.6-inch centerline height, and the forward ring pushes the center of the optic out 2 inches past the edge of your 1913 Picatinny rail. That cantilever reach gives you room to get the eye relief dialed in on bigger LPVOs while keeping the whole package low and tidy.
What Sets the Hostile Engagement Mount Apart
The standout feature here is the integral 45-degree RMR footprint built right into the rings. There are tapped mounting points so you can bolt an offset red dot, like a Swampfox Liberty or Justice, directly to the mount instead of chewing up rail space with a separate accessory. Roll the rifle onto that canted dot for close-up work, then square back up for distance through the scope. Folks who run this setup tend to appreciate that it keeps everything consolidated on one piece.
Built Tough From 7075-T6 Aluminum
This mount is CNC machined from 7075-T6 aluminum and wears a scratch-resistant hardcoat oxidized finish in matte black. Instead of thumb nuts, it uses low-profile T25 Torx bolts for more clamping power, and integrated recoil lugs keep the whole thing from shifting under heavy recoil. The T10 star ring cap screws torque to 10 inch-pounds and the T25 Picatinny mount bolts torque to 25 inch-pounds, so you've got clear numbers to work with when you're setting it up. Reviewers consistently describe it as built like a tank, and the trade-off for that durability is a mount that sits on the heavier side at around 8 ounces.
A Smart Fit for LPVO Builds
The 1.6-inch centerline works well with AR-type rifles and other inline-stock platforms, and the cantilever design pairs nicely with LPVOs that need generous eye relief, such as the Swampfox Tomahawk and Arrowhead series. If you're building a do-it-all carbine that needs to be fast up close and capable at distance, this mount handles both the glass and the backup dot in a single, no-nonsense package.
Key Specifications
- Manufacturer: Swampfox Optics
- MPN: SHRM-34-M2
- UPC: 889157002217
- Ring Diameter: 34mm
- Centerline Height: 1.6 in
- Style: 45-Degree Offset One-Piece Cantilever
- Material: 7075-T6 Aluminum
- Finish: Matte Black Hardcoat Oxidized
- Offset Optic Footprint: RMR, threaded 3.5 x 0.6
- Forward Ring Cantilever: 2 in beyond rail edge
- Mount Type: 1913 Picatinny
- Ring Cap Screws: T10 Star, 10 in-lbs
- Mount Bolts: T25 Star, 25 in-lbs
- Weight: Approx. 8.25 oz
What’s Included
- Hostile Engagement 34mm one-piece mount
- T10 wrench
- Mounting hardware (ring cap and Picatinny bolts)
Frequently Asked Questions
What size scope does the Hostile Engagement Mount fit?
This model is built for 34mm scope tubes and holds the optic at a 1.6-inch centerline height. The cantilever design extends the forward ring 2 inches past the edge of your Picatinny rail, which gives you room to set up eye relief on larger LPVOs. It's a good match for scopes like the Swampfox Tomahawk and Arrowhead series.
What optic footprint does the built-in offset mount use?
The integral 45-degree offset surface uses an RMR footprint, tapped and threaded 3.5 x 0.6. That means you can mount an RMR-pattern reflex sight like the Swampfox Liberty, Justice, or Kingslayer directly to the mount. Always double-check your specific red dot's footprint before ordering.
Why run an offset dot instead of mounting one on top?
A 45-degree offset dot lets you roll the rifle slightly to grab a fast 1x sight picture for close targets, then square back up to use the magnified scope for distance. The Hostile Engagement Mount puts both capabilities on one piece, so you don't give up rail space or add a separate accessory. The trade-off is a small cheek-weld adjustment to get behind the canted dot.
Is this mount strong enough for hard use?
It's CNC machined from 7075-T6 aluminum with integrated recoil lugs and T25 Torx bolts that give more clamping power than thumb nuts. Users routinely describe it as built like a tank and rock solid under recoil. The payoff for that toughness is a mount that runs a bit heavier than minimalist options, sitting around 8 ounces.




Reviews
There are no reviews yet.