0
0

Swampfox Hostile Engagement 30mm Mount 1.6″ 45° RMR, Black

UPC: 889157001524

$129.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Swampfox Hostile Engagement Mount takes their proven Hostile Engagement Rings and fuses them into a single beefy piece, giving you a rock-solid home for a 30mm LPVO plus an offset red dot without stacking a bunch of adapters. It's cut from 7075-T6 aluminum and wears a scratch-resistant hardcoat oxidized finish, the same tough treatment you'd find on quality AR receivers. At just 8.25 ounces, it keeps your rifle balanced while still feeling like it could take a beating.

What the Hostile Engagement 30mm Mount Does Differently

The real trick here is the integral 45-degree RMR footprint machined right into the mount. Cant the rifle slightly and your offset dot is ready for close-range work, then settle back into your LPVO for distance. The footprint is threaded for mounting an offset backup dot like the Swampfox Liberty or Justice, so there's no guessing on hardware. The mount pushes the center of the forward ring 2 inches past the edge of the rail, which opens up generous eye relief for LPVOs like the Tomahawk and Arrowhead.

Fit and Height on the Hostile Engagement Mount

This model runs a 1.60-inch centerline, which is the standard height for AR-15 and large-frame AR rifles. That height places your reticle just above AR-15 iron sights, making it a natural fit for in-line stock setups sitting level with the receiver rail. It'll also clear scopes with big 56mm objective lenses. If your stock sits lower than the rail, adding a cheek riser helps you get a solid weld.

Hardware and Install on the Hostile Engagement 30mm Mount

Swampfox went with low-profile T25 Torx bolts on the Picatinny clamp instead of thumb nuts, which gives you stronger clamping power, and integrated recoil lugs keep everything indexed and locked in under recoil. The T10 star ring cap screws torque to 10 inch-pounds, and the Picatinny clamp bolts seat down tight. It's a clean, no-nonsense setup for anyone building out a dual-optic AR.

Key Specifications

  • Manufacturer: Swampfox
  • Model: Hostile Engagement Mount
  • Manufacturer Part Number: SHRM-30-M2
  • UPC: 889157001524
  • Ring Diameter: 30mm
  • Centerline Height: 1.60 in
  • Mount Type: 1913 Picatinny, One-Piece Cantilever
  • Material: 7075-T6 Aluminum
  • Finish: Matte Black Hardcoat Oxidized
  • Offset Optic Footprint: Integral 45-degree RMR
  • Forward Offset: 2 in beyond rail edge
  • Weight: 8.25 oz
  • Length: 5.3 in
  • Color: Black

What’s Included

  • Swampfox Hostile Engagement Mount (30mm, 1.6" centerline)
  • Mounting hardware (T25 Picatinny bolts and T10 ring cap screws)

Frequently Asked Questions

What size scope tube does the Hostile Engagement Mount fit?

This version is built for 30mm diameter scope tubes. The rings also work great with precision scopes running large 56mm objective lenses. If you've got a 34mm optic, Swampfox makes that size in a separate model.

What optics can I mount on the 45-degree offset footprint?

The mount has an integral 45-degree RMR footprint, so any RMR-pattern reflex sight will bolt right up. The footprint is threaded for offset backup dots like the Swampfox Liberty, Justice, or Kingslayer. No extra adapter plate needed to run a secondary close-range optic.

Will the 1.6-inch centerline co-witness with my AR iron sights?

The 1.60-inch centerline places your optic reticle just above AR-15 iron sight height, which irons sit around 1.435 inches. It's the standard height for most AR-15 and large-frame AR builds with in-line stocks. It is not designed as a see-through co-witness mount.

How does this mount stay put under recoil?

Swampfox uses low-profile T25 Torx bolts on the Picatinny clamp, which deliver more clamping force than thumb nuts. Integrated recoil lugs index into the rail slots to keep the mount from walking. Torque the ring cap screws to 10 inch-pounds and clamp it down tight for a solid hold.

Additional information

UPC

889157001524

Manufacturer

Manufacturer Part Number

SHRM-30-M2

Reviews

There are no reviews yet.

Be the first to review “Swampfox Hostile Engagement 30mm Mount 1.6″ 45° RMR, Black”