$49.99
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
These Talley rings are a no-nonsense way to get a 1-inch scope mounted onto a rimfire rifle with an 11mm dovetail receiver. Machined from steel bar stock, they bring a smooth profile and real holding power to a part of the setup that too many folks cheap out on. The low .350" height tucks your optic right down against the receiver, which is exactly what you want on an Anschutz, Kimber 82, Remington 597, or similar rifle running a standard 1-inch scope tube.
The dovetails are precision cut to the correct angle, so they seat into an 11mm groove without any fighting or guesswork. Talley uses a double recoil shoulder base, the same approach found on their quick detach rings, which keeps the scope from creeping under recoil and helps the whole setup hold zero through repeated range trips. For a vertically split, fixed-ring design with no moving parts, that is a lot of confidence in a small package.
Installation is straightforward. The clamp screws snug down tight into the dovetail, and because these are a fixed vertical-split design, there is no lapping or fussing with multiple components. These come as a matched pair, ready to cradle a 1-inch tube. Folks mounting fixed-power scopes or compact rimfire optics tend to appreciate the low height since it keeps the sight line close to the bore for a natural head position.
These are built around the 11mm dovetail standard commonly found on Anschutz and a wide range of other rimfire receivers. If your rifle wears an 11mm dovetail and you are running a 1-inch scope, these drop right in. Just confirm your receiver groove is the 11mm pattern rather than a CZ-specific profile, since Talley makes a separate CZ version for those guns.
They are built for rimfire rifles with an 11mm dovetail receiver, which includes Anschutz and many other dovetail-grooved guns. As long as your receiver has the 11mm dovetail pattern and you are running a 1-inch scope tube, these fit. Measure your dovetail first if you are unsure, since 11mm and CZ profiles differ.
These are the low option at roughly .350 inches of ring height. That keeps a 1-inch scope close to the receiver for a comfortable cheek weld and good natural head position. They pair nicely with fixed-power or compact rimfire optics that do not need a lot of bell clearance.
They come as a complete set to mount one scope, with a front and rear ring included. You are getting everything needed to cradle a 1-inch tube on your dovetail receiver. No extra bases are required since the dovetail clamps directly to the rifle.
The steel construction and double recoil shoulder base are designed to keep the scope locked in place and prevent it from shifting. The Torx clamp screws snug down firmly into the dovetail for solid holding power. Owners running these on Anschutz and similar rifles report they stay put through repeated range sessions.
| UPC | 876430003283 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 22TRL |
| Style | .22 Rimfire Rings |
You must be logged in to post a review.
Reviews
There are no reviews yet.