Description
If you load for the 280 Remington and want tighter, safer brass, the L.E. Wilson Case Gage is one of those tools you reach for every single session. It's a one-piece, machined steel gage that checks two things that matter most to a bottleneck rifle round: datum-to-head length (headspace) and overall case length. Drop a case in, read it against the stepped ends, and you know exactly where your brass stands before it ever touches the press.
L.E. Wilson has been building reloading tools since 1927 and invented the original case gage back in 1935, so this isn't some new gimmick. The reputation is well earned. The machining is clean, the knurled center gives you a solid grip, and the steps on each end are cut to reference your case against minimum and maximum specs at a glance.
What the 280 Remington Case Gage Tells You
The biggest payoff here is setting up your full length sizing die correctly. Over-sizing brass is one of the most common reloading mistakes, and pushing the shoulder back too far shortens case life fast and can lead to case separation. By measuring a fired 280 Rem case first, you can dial your die to bump the shoulder just enough for reliable chambering without working the brass to death. The gage also shows you when cases have stretched past trim length, so you know when it's time to run them through the trimmer.
Getting Accurate Readings With the Wilson Case Gage
One thing worth remembering: set the case head and the end of the gage on a flat surface together when checking overall length. Holding it in your hand throws off the reading. Pair the gage with a caliper and you can put real numbers to your headspace rather than just eyeballing it. Keep in mind this gage checks length and headspace datum, not body diameter.
Made in the USA and built to last, this is a straightforward, reliable addition to any 280 Remington reloading bench.
Key Specifications
- Manufacturer: L.E. Wilson
- Manufacturer Part Number: CG-280R
- UPC: 857949005555
- Caliber: 280 Remington
- Type: Case Length / Headspace Gage
- Style: Regular, one-piece non-adjustable
- Measures: Min/max headspace and min/max case length
- Overall Length: 2.494"
- Outside Diameter: .991"
- Inside Diameter (large end): .473"
- Inside Diameter (small end): .347"
- Finish: Silver with knurled center
- Country of Origin: United States
What’s Included
- L.E. Wilson 280 Remington Case Gage
- Instruction sheet
- Cardboard storage box
Frequently Asked Questions
What does the L.E. Wilson 280 Remington Case Gage actually measure?
It measures two key things on your brass: datum-to-head length (headspace) and overall case length. Drop a fired or resized 280 Rem case into the gage and reference the head against the stepped ends to see if you're within min and max specs. It does not measure body diameter, so you'll still want to confirm the case chambers in your rifle.
Can I use this case gage to set up my full length sizing die?
Yes, that's one of its best uses. By measuring a fired case first, you can set your die to bump the shoulder just the right amount instead of over-sizing. This keeps your brass from being overworked and extends case life, which is the whole reason Wilson built the tool.
How do I get an accurate reading with the Wilson Case Gage?
Set both the case head and the end of the gage flat on a hard surface together, rather than holding it in your hand. Pairing the gage with a caliper lets you put exact numbers to your headspace and trim length. The stepped ends give you a quick visual check for both minimum and maximum limits.
Does this gage work for 280 Ackley Improved?
No, this gage is cut specifically for the standard 280 Remington cartridge. The 280 Ackley Improved has a steeper shoulder and different case geometry, so it needs its own dedicated gage. Always match the gage to the exact cartridge you're loading for accurate results.





Reviews
There are no reviews yet.