$16.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The operating rod spring is one of those parts you never think about until your MCR starts short-stroking or getting sluggish on the return. This is the FightLite factory-original replacement (part number 15081), so it drops right in with the correct tension and dimensions the platform was built around. No guessing, no fitment headaches.
The MCR runs a short-stroke gas piston that drives an operating rod, which in turn pushes the bolt carrier rearward to unlock and cycle the action. That op rod needs consistent spring pressure to return everything to battery cleanly shot after shot, especially when you're feeding from an M27 linked belt and putting a lot of rounds downrange in a hurry. A tired or worn spring is often the culprit behind timing issues, so having a fresh one on hand is smart insurance for a gun that's built to run hard.
This spring lives in the piston and op-rod assembly, working alongside the operating rod (15080) to keep the cycle timed correctly. Because the MCR isolates the bolt carrier from gas fouling the way any good piston gun does, the mechanical bits like this spring end up doing the heavy lifting on reliability. Keeping it in spec matters.
Springs are a wear item, plain and simple. If you shoot your MCR the way it was meant to be shot, cycling it hard through belts and mags, the operating rod spring will eventually take a set and lose some tension. This is a cheap, sensible part to keep in your spares kit or to grab when you're doing a full refresh of the springs in your upper. It's also included in FightLite's MCR Upper Spring Rehab Kit, which tells you it's a normal maintenance item and not something to stress over replacing.
Bottom line, if you own an MCR, this is a good part to have in the drawer before you need it.
It provides the return tension for the operating rod in your MCR's short-stroke piston system. When the piston drives the op rod rearward to cycle the bolt carrier, this spring brings everything back to battery so the gun is ready for the next round. Keeping it in spec is key to reliable cycling.
Yes, this is the FightLite Industries factory-original operating rod spring, part number 15081. When you're maintaining a proprietary system like the MCR, sticking with factory parts is the safest way to keep fitment and timing correct.
Springs wear over time and lose tension, which can show up as sluggish cycling, short-stroking, or inconsistent return to battery, especially after heavy belt-fed sessions. If your MCR starts running off, this is one of the first inexpensive parts worth swapping. It's smart to keep a spare in your kit before problems pop up.
This spring is designed for the FightLite MCR platform and matches the part FightLite includes in their MCR Upper Spring Rehab Kit. It works with the standard MCR operating system regardless of your barrel length or feed setup.
| UPC | 854118002841 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 15081 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.