Description
If you want a red dot on your Smith & Wesson M&P 22 Compact but don't want to send the slide out for milling, this EGW mount is the simple way to get there. It replaces the factory rear sight in the dovetail, giving you a rigid platform for a Vortex Razor or any optic sharing the C-More RTS/STS footprint. No permanent modifications, and you can pull it off and reinstall your original rear sight whenever you like.
EGW machines this one from 7075 aluminum and finishes it in a Type III matte black hardcoat anodize, so it shrugs off range abuse and holds up to the elements. It measures right around 1.83 inches long and 1.06 inches wide, keeping the optic sitting low and tucked in close to the slide for a natural sight picture. The flat deck and precise fitment keep your dot locked in place and holding zero.
Getting the M&P 22 Compact Sight Mount On
Installation is straightforward if you've worked a dovetail before. Drift out the factory rear sight, press the EGW mount into the dovetail, then set your optic on top. The kit ships with two #8-32 button head screws, and you'll want a 5/64-inch allen wrench, a dab of blue Loctite on the threads, and 15 in-lbs of torque to button everything up. A sight pusher tool makes removing the old rear sight a lot easier, so it's worth having on hand.
Pairing an Optic With This EGW Razor Mount
This base is built around the Vortex Razor and the C-More RTS, STS, and STS2 pattern, so confirm your dot matches that footprint before ordering. It is not cut for the Vortex Venom or Viper, which ride a different mounting standard. Keep in mind that adding weight to a .22 slide can affect cycling with some loads, so plan to test your ammo once the dot is mounted.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- Manufacturer Part Number: 49454
- UPC: 841370115907
- Fits: Smith & Wesson M&P 22 Compact
- Optic Compatibility: Vortex Razor, C-More RTS/STS/STS2
- Mount Type: Rear sight dovetail replacement
- Number of Bases: 1-Piece
- Material: 7075 Aluminum
- Finish: Type III Matte Black Hardcoat Anodize
- Color: Black
- Overall Length: 1.83 in
- Overall Width: 1.06 in
- Mounting Hardware: (2) #8-32 Button Head Screws
- Tool Required: 5/64 in Allen Wrench
- Torque Spec: 15 in-lbs
- Style: Tactical
What’s Included
- EGW Vortex Razor sight mount for S&W M&P 22 Compact
- (2) #8-32 button head mounting screws
Frequently Asked Questions
Does this EGW mount require cutting or milling the M&P 22 Compact slide?
No. This mount replaces the factory rear sight in the dovetail, so there's no machining or permanent modification to your slide. You can also remove it later and reinstall your original rear sight whenever you want.
What optics fit this Vortex Razor sight mount?
It's built for the Vortex Razor along with the C-More RTS, STS, and STS2 red dots, which all share the same mounting footprint. It does not fit the Vortex Venom or Viper, since those use a different pattern. Double-check your optic's footprint before ordering to make sure it lines up.
What tools and hardware do I need to install it?
The mount comes with two #8-32 button head screws, and you'll need a 5/64-inch allen wrench to tighten them. Apply blue Loctite to the threads and torque to 15 in-lbs. A sight pusher tool makes drifting out the factory rear sight much easier.
Will adding a red dot affect how my M&P 22 Compact cycles?
It can. Mounting an optic adds weight to the slide, and on rimfire pistols that extra mass can sometimes influence reliable cycling. It's a good idea to test a few different loads after installing your dot to find what runs best in your gun.





Reviews
There are no reviews yet.