$36.00
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're running a Savage A17 or A22 Magnum and want to reach past your zero without maxing out your scope's elevation turret, this EGW 20 MOA Picatinny rail is the piece that gets you there. It's a one-piece base machined for these specific rimfire actions, giving you a solid, repeatable foundation for your rings and optic. The 20 MOA of built-in cant tilts the scope forward just enough to bank elevation back into your adjustment range, which matters once you start pushing those fast .17 HMR and .22 Mag loads out to distance.
Standard flat bases work fine up close, but they eat into your scope's travel when you dial for farther targets. The built-in slope here puts that elevation back in your pocket. EGW recommends the 20 MOA option for shooters stretching things out, so if most of your trigger time is at longer ranges this is the version you want over the flat 0 MOA base.
This rail is machined from domestic 6061 T6 extruded aluminum and finished in matte black anodizing, so it stays light at right around 2 ounces while holding up to weather and recoil. A channel milled down the center trims the weight even further without giving up strength, and in a lot of setups it leaves your factory iron sights usable underneath the optic.
The cross slots run the entire length of the rail, so you've got plenty of room to position your rings for proper eye relief and get your scope sitting right. It works with any Picatinny or Weaver rings, and the design is ambidextrous. EGW updated this mount with extra holes to fit the A17, A22 Mag, and A22 LR across production runs, though it's smart to measure your receiver's hole spacing to confirm the fit. Mounting hardware and a T-10 bit come in the box, and EGW suggests torquing the screws to 20 inch-pounds with a drop of blue thread locker.
It's built for the Savage A17, A22 Magnum, and A22 LR. EGW updated the mount with extra holes to cover these actions across production runs. Since hole spacing has varied over the years, it's worth measuring your receiver against the published 3.181 inch center spread before you order to confirm the fit.
Any standard Picatinny or Weaver rings will work with this base. The cross slots run the full length of the rail, so you've got flexibility to place your rings where you need them for the right eye relief. Rings are not included, so you'll want to grab a set in the height your scope and objective call for.
The 20 MOA cant tilts the scope slightly forward, which banks extra elevation back into your scope's internal adjustment. That lets you dial for longer distances without running out of travel. If most of your shooting is at extended range with .17 HMR or .22 Mag, the 20 MOA is the better pick. For closer-in work the 0 MOA flat base is usually plenty.
In many setups the milled center channel leaves the factory iron sights usable underneath the optic, but it depends on your specific rifle and scope height. EGW designed the channel to reduce weight and help maintain that clearance where possible.
| UPC | 841370112432 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 41982 |
| Length | 8.8000 |
| Style | PICATINNY |
You must be logged in to post a review.
Reviews
There are no reviews yet.