Description
Mounting a red dot on a Sig M17 or M18 usually means milling the slide, but this EGW adapter plate skips all of that. It drops into the rear sight dovetail on your slide, giving you a stable platform for a Trijicon RMR or SRO without permanently altering the gun. Machined from 7075 aluminum and finished in a matte black hardcoat, it is built to hold zero and take the beating that comes with a service pistol.
What the EGW Sig M17 RMR Plate Actually Fits
Fitment matters here, so it is worth being specific. This plate works with the Sig M17, M18, P320 X-Five Legion with the Romeo1 PRO cut, and the P320 X-Carry and X-Compact models that have the Romeo1 PRO cut with no rear sight cut. On the optic side it accepts the Trijicon RMR and SRO footprint, along with several Holosun models including the HE407C, HE507C, HS407C, HS507C, and HS407A3 X2, plus Swampfox Kingslayer, Liberty, and Justice. It does not fit Sig P320 models with a dovetail rear sight cut, the P320 RX, P320 RX X-Compact, P320 X-Five with the Romeo1 cut, or the Sig M17 military surplus pistols.
Getting the EGW RMR Adapter Installed
Installation is about as straightforward as it gets. You remove the existing rear sight plate from the slide, set the adapter in its place, and mount your optic using the included screws. The plate ships with two 6-32 flat head screws and two 4-40 set screws, and the optic screws take a 5/64 inch allen wrench. A dab of blue Loctite on the threads and a torque spec around 15 in/lbs keeps things locked down under recoil. Since it is a bolt-on part, you can pull the plate and reinstall your rear sight down the road whenever you want.
For anyone running a duty or range M17 who wants a dot without committing to a cut slide, this is a clean, reversible way to get there. EGW has a long reputation for well-machined mounting hardware, and this plate carries that same no-nonsense quality.
Key Specifications
- Manufacturer: EGW (Evolution Gun Works)
- MPN: 49500
- UPC: 841370112135
- Color: Black (Matte Black Hardcoat)
- Material: 7075 Aluminum
- Mount Type: Dovetail (Rear Sight)
- Optic Fitment: Trijicon RMR / SRO, Holosun 407C/507C, HS407A3 X2, Swampfox Kingslayer/Liberty/Justice
- Pistol Fitment: Sig M17, M18, P320 X-Five Legion, P320 X-Carry/X-Compact (Romeo1 PRO cut)
- Overall Length: 2.398 in
- Overall Width: .99 in
- Required Tool: 5/64 in Allen Wrench
- Style: Adapter Base
What’s Included
- EGW adapter plate
- (2) 6-32 flat head screws
- (2) 4-40 x 1/4 set screws
Frequently Asked Questions
Does this EGW plate let me mount an RMR on my Sig M17 without milling the slide?
Yes, that is the whole point of it. You remove the rear sight plate from your slide and install this adapter in its place, which gives you a mounting surface for a Trijicon RMR or SRO. No permanent machining is needed, and you can swap your rear sight back in later if you ever want to.
Which optics work with the Trijicon RMR adapter plate?
It uses the RMR footprint, so it fits the Trijicon RMR and SRO directly. It also accepts several Holosun models including the HE407C, HE507C, HS407C, HS507C, and HS407A3 X2, along with Swampfox Kingslayer, Liberty, and Justice sights.
Will this fit any Sig P320 variant?
Not all of them. It fits the M17, M18, P320 X-Five Legion with the Romeo1 PRO cut, and X-Carry/X-Compact models with the Romeo1 PRO cut and no rear sight cut. It does not fit the P320 RX, P320 RX X-Compact, P320 X-Five with the Romeo1 cut, Sig M17 military surplus pistols, or P320 models with a dovetail rear sight cut.
What tools and hardware do I need to install it?
The plate comes with the mounting screws you need, and the optic screws call for a 5/64 inch allen wrench. A little blue Loctite on the threads and torquing to around 15 in/lbs will keep the optic secure under recoil.




Reviews
There are no reviews yet.